Chinese Factory B2B Wholesale Waterproof Elevated Bed System (Philippines Market): 40cm Ground Clearance + 10cm High-Density Foam, ISO Certified for Typhoon Relief Scenarios
Ground Flooding Submersion Pain Point: During Philippines typhoon season, shelter floor water depth commonly reaches 20-30cm, traditional floor-laid mattresses directly contact muddy water causing poor sleeping environment for victims, Philippines B2B rescue organizations urgently need 40cm ground clearance elevated bed systems to solve water submersion issues.
Mattress Water Absorption Failure Pain Point: Ordinary thin pads only 3-5cm thick with density below 25kg/m³ have water absorption rate >30% when wet, completely losing support function within 24 hours, Philippines emergency rescue procurement parties need 10cm high-density foam (density 45kg/m³) and 100% non-absorbent material waterproof mattresses.
Blanket Water-Induced Hypothermia Pain Point: Traditional cotton blankets increase weight 3x when wet, heat retention rate plummets from 80% to 30%, Philippines B2B bulk procurement customers need 300gsm water-repellent blankets (contact angle >140°) to quickly repel water droplets, maintaining 95% heat retention rate.
Space Adaptation Challenge: Limited shelter tent interior space (standard 3m×4m), fixed-size elevated beds cause space waste or installation impossibility, Philippines rescue equipment professional wholesalers need length 1800-2000mm adjustable, width 750-900mm optional modular design.
Bulk Procurement Verification Challenge: Philippines B2B customers cannot verify on-site 1.5mm wall thickness steel pipes strength, phosphating anti-rust treatment process, 80μm coating thickness technical parameters, requiring ISO 9001 certification and third-party test reports to establish trust.
2. Video Guidance: Product Functional Demo & B2B Inspection Reference
▶Video Guidance: View 40cm ground clearance load-bearing test (150kg static loading), 10cm high-density foam compression rebound demo (compression permanent deformation <8%), water-repellent blanket water splash experiment (contact angle >140° water droplets rapidly rolling), adjustable steel frame assembly/disassembly process (single person 5-minute assembly), anti-rust coating salt spray test (72 hours no corrosion) content, suitable for Philippines B2B customers inspection and procurement reference;
Modular Adjustable Design: Adjustable disaster relief elevated bed supports length 1800-2000mm adjustable (every 100mm one gear, total 3 gears), width 750-900mm optional (standard single 750mm, widened 900mm), disassembly requires no tools, single person 5-minute assembly, folded volume reduced 60% (length 200cm→80cm), saving 40% transportation space and 30% warehousing costs compared to fixed-size solutions, solving Philippines B2B procurement parties tent space adaptation challenges and cross-border logistics cost pressures.
Anti-Rust Process Guarantee: Bed frame surface adopts phosphating anti-rust treatment + electrostatic spraying dual process, coating thickness 80μm (tolerance ±5μm), passing 72-hour salt spray test (GB/T 10125 standard) with no corrosion, improving 3x anti-rust lifespan compared to ordinary painting process (coating thickness 40μm, salt spray test 24 hours), solving Philippines high-humidity coastal environment (annual average humidity >80%) steel frame corrosion issues, reducing Philippines B2B customer maintenance costs 50%.
ISO 9001 Quality Certification: Chinese Factory passed ISO 9001 Quality Management System Certification (China-issued, certificate available), 10cm high-density foam, 1.5mm wall thickness steel pipes, 300gsm water-repellent coating core parameters all have third-party test reports (SGS/Intertek), ensuring Philippines B2B bulk procurement product consistency, overseas certifications (such as Philippines PSA certification) can be coordinated through third parties if needed, costs borne by procurement party.
4. Product List: Waterproof Elevated Bed System Core Configuration
Emergency Waterproof Tent (optional package): Standard 3m×4m specification, 210D Oxford cloth + PU3000 waterproof coating, seam heat-sealed, waterproof index >3000mmH₂O, accommodates 4-6 adjustable elevated beds, rapid setup time <10 minutes.
Foldable Water Storage Container (optional package): 20L capacity, food-grade PE material, folded thickness <5cm, equipped with faucet and handle, solving Philippines rescue scenario clean water storage needs.
Portable Water Purifier (optional package): 0.01 micron ultrafiltration membrane, 99.99% bacteria filtration rate, single purification 2L, weight <500g, suitable for Philippines typhoon relief emergency drinking water treatment.
Moisture-Proof Storage Bag (optional package): 600D Oxford cloth, inner PE waterproof film, 50L capacity, equipped with shoulder strap and handle, storing mattress, blanket and other supplies.
5. Trust Certification: Chinese Factory Quality Management System Guarantee
ISO 9001 Quality Management System Certification: Chinese Factory obtained ISO 9001 certification (China-issued, certificate number available), covering waterproof elevated bed system full production process quality control, ensuring Philippines B2B bulk procurement product consistency, annual capacity reaches 50,000 sets.
Core Parameter Test Reports: 10cm high-density foam (density 45kg/m³, compression permanent deformation <8%), 1.5mm wall thickness steel pipes (tensile strength ≥370MPa), 300gsm water-repellent coating (contact angle >140°), 80μm anti-rust coating (salt spray test 72 hours) parameters all have SGS/Intertek third-party test reports, supporting Philippines B2B customers factory inspection verification.
Factory Live Verification: Supports Philippines procurement parties remote video factory inspection or commissioning third-party inspection agencies on-site verification of Chinese Factory production lines, raw material warehouses, finished product testing areas, transparently displaying phosphating anti-rust process, electrostatic spraying process, foam foaming process and other key links.
Overseas Certification Assistance: If Philippines B2B customers need local PSA certification or other overseas qualifications, Chinese Factory can assist in connecting third-party certification agencies, costs borne by procurement party, certification period needs communication based on specific requirements.
Philippines Emergency Rescue Organizations: National Disaster Risk Reduction and Management Council (NDRRMC), local government disaster relief offices, typhoon emergency response centers, need bulk procurement 40cm ground clearance elevated beds and 10cm high-density foam mattresses for shelter rapid deployment.
Philippines Flood Relief Equipment Professional Wholesalers: Southeast Asia market-oriented rescue supply traders, need Direct Supply from Chinese Factory bulk supply adjustable disaster relief elevated bed system, supporting Philippines local warehousing or cross-border direct mail.
Philippines International Rescue Organization Partners: Red Cross Philippines Chapter, United Nations High Commissioner for Refugees (UNHCR) Philippines Office, international medical teams, need ISO 9001 certifiedwaterproof elevated bed system for humanitarian assistance projects.
Philippines Typhoon-Prone Region Government Procurement Departments: Luzon Island, Visayas Islands, Mindanao Island and other typhoon high-frequency region local governments, need to establish emergency supply reserve, bulk procurement 150kg load-bearing elevated beds and water-repellent blankets.
Philippines Enterprise CSR Project Procurement Parties: Large enterprise social responsibility projects, donating waterproof elevated bed systems to typhoon-affected communities, need Chinese Factory to provide customized packaging and project logo printing services.
7. Core Procurement Advantages: Direct Supply from Chinese Factory Reducing Philippines B2B Costs
Price Advantage: Direct Supply from Chinese Factory no middlemen, Philippines B2B bulk procurement quantity discounts, specific unit price needs procurement list (product name, estimated quantity, target delivery date) communication confirmation, bulk orders (≥500 sets) can optimize 10-15% procurement costs.
Delivery Guarantee: Regular order production cycle needs confirmation based on order quantity and factory schedule, standard 500 sets order reference period 15-20 working days, supporting Philippines B2B customers batch delivery or urgent rush (needs advance communication), logistics timeliness calculated based on destination port (Manila/Cebu) and transportation method (sea/air).
Customization Flexibility: Supports elevated bed length (1800-2000mm), width (750-900mm), ground clearance (35-45cm) customization, mattress thickness (8-12cm), density (40-50kg/m³) customization, blanket weight (250-350gsm) customization, Philippines B2B customers can adjust specifications according to rescue scenario needs, customization costs calculated based on modification scope.
Packaging Optimization: Standard export packaging is carton + woven bag, single set volume approximately 0.15m³ (after folding), 20-foot container loads 180-200 sets, 40-foot high cube loads 400-450 sets, supporting Philippines procurement parties designated packaging method (such as wooden box, pallet) or project logo printing, additional costs need communication confirmation.
After-Sales Transparency: Product quality issues (such as steel pipe welding cracks, foam density not meeting standards, coating peeling) compensated or replaced according to agreed proportion, responsibility division based on procurement contract signed by both parties, Chinese Factory does not assume Philippines local improper use, transportation damage and other non-quality issues, after-sales response time within 24 hours feedback processing plan.
8. FAQ: Philippines B2B Customer Common Questions
8.1 Q: How to confirm minimum order quantity?
A: Adjustable disaster relief elevated bed, thickened waterproof mattress, water-repellent blanket single items and sets minimum order quantity needs communication based on order scale, only supports Philippines B2B bulk procurement, retail not supported, recommended to provide procurement list (product name, estimated quantity) for Chinese Factory to evaluate production schedule and quotation.
8.2 Q: How to verify 40cm ground clearance and 10cm high-density foam core parameters?
A: Chinese Factory can provide SGS/Intertek third-party test reports (including ground clearance dimensional tolerance, foam density 45kg/m³, steel pipe wall thickness 1.5mm, coating thickness 80μm parameters), supporting Philippines B2B customers commissioning third-party inspection agencies (such as SGS Philippines branch) for inspection, inspection costs borne by procurement party, inspection failure handled according to contract agreement.
8.3 Q: How to arrange logistics and customs clearance?
A: Direct Supply from Chinese Factory to Philippines destination port (such as Manila Port/Cebu Port), supporting FOB/CIF/DDP trade terms, specific logistics costs and timeliness calculated based on order quantity, destination port, transportation method (sea/air), customs clearance responsibility divided according to agreed trade terms, Chinese Factory can assist in providing customs clearance documents (such as Certificate of Origin CO, packing list, invoice), Philippines local customs clearance agent and tariffs need Philippines B2B customers to arrange or commission freight forwarder.
9. Action Guidance: Rapid Connection for Philippines B2B Bulk Procurement
▶ Procurement Connection: Provide procurement list (product name such as Adjustable Disaster Relief Elevated Bed/Thickened Waterproof Mattress, estimated quantity, target delivery date, destination port), communicate through official channels, within 24 hours feedback quotation and production schedule, supporting Philippines B2B large orders acceptance.
▶ Sample Application: Philippines B2B customers can apply for sample testing (1 set elevated bed system including bed frame + mattress + blanket), sample costs and international express costs need communication confirmation, batch order confirmation can offset partial payment, sample delivery 7-10 working days.
▶ Qualification Verification: Request ISO 9001 certification certificate, third-party test reports (density 45kg/m³/wall thickness 1.5mm/coating thickness 80μm), factory live photos and other materials, supporting remote video factory inspection or commissioning third-party agencies on-site verification of Chinese Factory production capacity.
▶ Official Website Reference: To view product basic information and detail images, visit official website https://www.yrftextile.com/products, specific procurement policies subject to mutual communication.
