Emergency Inflatable Mattress: Comfort in Any Situation
This mattress is the perfect choice for anyone involved in disaster relief, whether you're a soldier, medical professional, or part of a humanitarian aid team. With its advanced moisture-resistant and anti-bug properties, you can rest assured that it will keep you comfortable and protected, no matter the conditions. Plus, its lightweight design makes it easy to transport and store, so you can be ready whenever the need arises. So why wait?
Start by deciding whether the project needs individual sleeping spaces or a widened surface, what inflation equipment will be available, and how much deployment and storage space can be assigned. Selecting from thickness or "built-in pump" titles alone can result in incompatible valves, missing accessories, excessive packed volume, or mixed products at receiving.
This category compares single-person chambered mats, widened or double-pillow directions, and combinations of pillow zones, valves, pumps, and storage accessories. Non-inflatable foam mattresses, folding mats, and inflatable pillows remain adjacent categories. Confirm dimensions, weight, thickness, material, air retention, load, and packing against the selected product's written specification, sample, and applicable test.
We have manufactured emergency inflatable and textile products for 20 years, with stable bulk supply for government disaster reserves, humanitarian aid, military and temporary medical projects. We run full in-house production from PVC welding to cutting and packing, with consistent batch quality and full production traceability. Standard emergency inflatable mattress models withstand 50+ inflate/deflate cycles without obvious deformation, and emergency orders can enter production within 72 hours.
✅ Bulk order guarantee: All batches are inspected per AQL (Acceptable Quality Level) 2.5 standard, including 24 hour air retention test, weld strength and size verification. Standard PVC and custom TPU models available for bulk government tender and emergency kit projects.
Move between disaster-settlement categories currently published on the website.
These are standard bulk configurations for real B-end emergency, medical and work site projects:
Standard material
0.28-0.32mm (0.011-0.013 inch) virgin heavy duty PVC tarpaulin, thickness tolerance ±0.02mm, no recycled material
Standard size
Single: 190×70×22cm (75×28×9 inch); Double: 190×140×22cm (75×55×9 inch), tolerance ±2cm (0.8 inch) at 20-25℃ (68-77℉)
Unit weight
Single: 1.8-2.5kg (4.0-5.5 lbs); Double: 3.5-4.5kg (7.7-9.9 lbs), weight tolerance ±8%
Construction
Coil beam I-beam structure, double anti-leak Boston valve, integrated raised pillow zone, 5mm (0.2 inch) heat welded reinforced corners
Performance
24 hour air leakage ≤5% at 20-25℃ (test after 2h pre-stretch); seam tensile strength ≥30N (6.7 lbf); evenly distributed static load 150kg (330 lbs) for single size
acking & loading
Individual carry bag/color box; 3000-4000 single units per 40HQ container
This is our highest volume model for civil affairs bureaus, emergency management departments and government disaster reserve tenders. Used for earthquake/flood temporary settlements. Built-in foot pump, repair kits and custom printing are paid options.
Cold resistant PVC passes -10℃ (14℉) cold bend no crack; standard PVC for 0℃+ use; 24h air leakage ≤5%; works with both electric and hand pumps
For army, armed police and SWAT field exercises and temporary camps. Tough fabric resists snags from gear and rough ground, works with standard military folding cots or direct ground use.
Standard material
0.3mm (0.012 inch) smooth gloss PVC, no flocking, rounded corners for easy disinfection
Standard size
190×70×22cm
Unit weight
2.0-2.5kg (4.4-5.5 lbs)
Construction
Smooth non-porous surface, no loose strings or small parts that trap contamination, compatible with standard hospital disinfectant wipes
Performance
Resists common hospital disinfectants; 24h air leakage ≤5%; evenly distributed static load 180kg (397 lbs)
For temporary hospitals, cabin hospitals, isolation points and medical escort use. Smooth surface wipes clean completely with no hygiene dead corners. Flocked/fuzzy surfaces are a paid custom option for home use only, and are not used for medical or emergency B-end orders.
Standard material
School/gym short term shelter: 0.25-0.28mm economy PVC; Long term mining/field work: 0.35mm heavy duty; Emergency kit packing: compact 0.28mm single size
Standard size
190×70×20cm for shelters; compact 180×60×18cm for emergency kit insertion
Unit weight
1.5-2.5kg (3.3-5.5 lbs); compact kit models 1.2-1.6kg
Construction
Bulk pack for large quantity distribution; work site models include matching PVC repair patches as standard option; flat pack fits standard emergency kit dimensions
For school gym emergency shelters, public evacuation points, geological/forestry/engineering work camps, and bulk household emergency kit packing for communities and enterprises. Economy models for short term shelter use, heavy duty models for long term work site repeated use.
An emergency inflatable mattress should not be selected by user capacity alone. First confirm where it will be laid, how it will be inflated, where it will be stored during the day, and who will clean and repack it after use. A similar-looking mattress may require different chambers, valves, accessories, and packing for a tent, a school gym, or a multi-site distribution project.
Confirm floor condition, usable area per sleeping space, circulation requirements, available power, and daytime storage. The sample drill should cover unpacking, inflation, placement, deflation, and repacking so the project does not evaluate only the inflation time of one unit while overlooking the staff needed for batch deployment and recovery.
Allocate sleeping spaces from the clear internal dimensions and circulation route first, then confirm the actual inflated length and width, valve operating clearance, and floor protection method. Mattresses, inflators, and accessories should be identified and packed by site to avoid destination-side resorting.
Where products must be carried to several sites, compare packed volume, carrying distance, available inflation equipment, component control, and post-use recovery together. Do not assume that a pump, hose, storage bag, or repair kit is supplied with every mattress; lock each item in the quotation and packing list.
These are the most common quality and specification issues in bulk emergency inflatable mattress orders:
Any of the following issues result in automatic batch rejection for our orders:
Plan this direction for individual bed spaces or person-level issue. Before quotation, confirm deployed length, width and thickness, packed dimensions, weight, chamber orientation, valves, inflation equipment, and storage bag. A single-person appearance in an image is not a universal specification.
Consider this direction when the sleeping surface and pillow zone need an integrated structure. Confirm whether the pillow zone is a separate chamber, how it deflates and folds, and whether it changes deployed length, packing, and acceptance measurement points. An integrated pillow zone does not replace a separate pillow requirement in every project.
Use this direction where a wider sleeping surface is required. Do not inherit weight, packed size, inflation time, or carton data from the standard single version; maintain a separate model record and verify that the installed layout retains the required circulation space. Independent dual chambers are available as a paid option for redundancy.
Confirm a built-in foot pump, external inflator, storage bag, or repair kit item by item during inquiry and sample review. Establish the power available on site, deployment team size, and number of mattresses served by each inflator before locking the interface, quantity, and carton allocation. Similar appearance does not make an accessory standard.
Decision field
Buyer input
Confirmation
Model and capacity
Single, double, or another confirmed version
Product code and approved sample
Dimensions and weight
Deployed size, inflated thickness, packed size, net weight
Measurement record under one condition
Fabric and airtight layer
Composition, layer construction, thickness, color
Specification, material document, sample
Chambers and seams
Chamber layout and welded or other seam direction
Drawing, sample, applicable test
Valve and inflation
Valve, built-in or external equipment, operation-time field
Component list, operation record, and sample
Packing and delivery
Bag, repair items, unit pack, carton, carton mark
Approved component list and packing record
Professional Term Explanation
All models support flexible customization for bulk and tender orders; all custom options are quoted separately:
All custom requirements are confirmed in writing before production; pre-production samples are provided for approval before bulk run.
MOQ note: In-stock standard PVC models have 100pc MOQ for trial orders. Custom TPU / custom spec / custom printed orders have 500pc MOQ due to TPU raw material minimum lot size, final MOQ confirmed per order.
Images and samples can confirm form, color, chamber outline, pillow zone, valve position, seams, packed form, and visible components. They cannot independently prove waterproof rating, airtightness duration, puncture or abrasion resistance, temperature range, load, service life, medical suitability, or institutional standards.
When a project requires these fields, provide the selected model, method, conditions, result, report identification, and valid document. Review figures from different models or document scopes separately; only results matching the purchased configuration and test conditions should enter the order specification.
Sample Policy: Specification sheets, formal quotations and sample application guides are provided free of charge. Sample cost is calculated separately based on exact specification, size and customization requirements. Sample fee and shipping cost are prepaid by the buyer; sample fee can be credited against bulk order payment when the order meets agreed quantity and amount. Blank in-stock samples ship 1-2 working days after payment; custom printed / TPU samples take 7-10 working days.
Quality Control Process: 1) Incoming material inspection: verify PVC thickness, tensile strength, cold resistance and odor; 2) In-process inspection: check weld width, valve sealing and chamber alignment during production; 3) Finished goods inspection: per AQL 2.5 standard, inflate sampled units for 2 hour pre-stretch then 24 hour air retention test, check seams, valves and dimensions; 4) Pre-shipment inspection: third party SGS/BV/Intertek inspection can be arranged, third party cost borne by buyer.
Order Terms: Standard order lead time 7-15 days; emergency orders enter production within 72 hours, final lead time confirmed per contract. Goods ship from main Chinese ports, customer nominated ports supported; FOB/CIF/EXW Incoterms standard, DDP can be evaluated per destination. Standard products carry manufacturing defect warranty. Quotations are normally valid for 30 days. Standard care: inflate to firm not rock hard, avoid overinflation in direct sun, wipe clean with mild soap and water, fully dry before storage, do not store folded for long periods in direct sunlight or below freezing.
All mattresses are packed in individual carry bags, then cartoned or baled for ocean shipping. Store fully deflated and dry in cool, dry, well ventilated areas away from direct sunlight, sharp objects and chemicals.
We also supply matching emergency bedding and relief blankets for combined tender orders, plus matching emergency inflatable pillows for kit sets.
Sample review should cover inflation and deflation, valve closure, chamber and seam appearance, deployed and packed measurement, component count, labels, and packing. Define inflation condition, rest time, environment, and measurement method before testing.
Record single, widened, and different chamber structures separately. For repeat orders, compare the previously approved specification, sample, measurements, tests, labels, and packing records, and approve any valve, surface, chamber, dimension, weight, or accessory change in writing before order confirmation.
A bulk project needs more than an answer for how long one emergency inflatable mattress takes to inflate. State how many units must be deployed at the same location, available staff, number and power source of pumps, valve interface, shift window, and backup equipment. A unit time is comparable only when inflation pressure, operator, pump, and environment are controlled.
Run a small-batch deployment trial with the approved sample. Record unpacking, unfolding, equipment connection, inflation, valve closure, visual inspection, and movement to the sleeping position. Also note pump overheating, loose interfaces, and whether operators confuse inflation and deflation steps. Base the plan on the complete workflow rather than a promotional minimum time.
When power is unstable or distribution covers several areas, describe the available equipment in the inquiry. Built-in foot pumps, hand pumps, electric pumps, and external inflators change deployment speed, accessory count, training, repair, and packing. Do not assume interfaces are interchangeable before the product is selected.
The valve affects inflation, deflation, repacking, and later replacement. Record valve quantity, position, opening direction, seals, whether caps or plugs remain attached, and the pump or hose interface. Images can confirm position but cannot replace an operating check.
Chamber layout affects inflated shape, support zones, and the effect of local pressure loss. For longitudinal, transverse, divided, or raised-pillow directions, record inflated flatness, the appearance of each zone, seam continuity, and changes after use. Different chamber counts should not be merged into one product merely because the colour is similar.
If the project requires air-retention, leakage, seam, or durability testing, define inflation condition, working pressure or endpoint, rest period, environment, measurement points, allowed change, and pass/fail method. The report must cover the purchased structure and approved sample.
Deployed dimensions determine user and sleeping-space fit, while packed dimensions control warehousing, transport, and distribution. Measure both under agreed inflation or deflation conditions and state whether the pillow zone, pump, storage bag, and repair accessories are included. A flat uninflated size alone does not define actual use space.
After deflation, verify how easily air is removed, the folding or rolling sequence, fit of straps or storage bag, and whether ordinary staff can return a used mat to the planned volume. If only an experienced operator can force the sample back into its bag, bulk recovery may lead to damaged packing, lost accessories, and increased storage volume.
Wait for confirmed unit packing and carton data before container or warehouse calculations. Chambers, pillow zones, pumps, and accessories change gross weight, unit volume, and carton quantity. Do not calculate a widened product from single-person data or estimate logistics cost from images.
For multiple destinations, give each shape, colour, valve, and accessory combination a buyer-recognizable project reference. Keep it consistent across unit labels, instructions, storage bags, carton marks, and receiving lists so distribution staff can distinguish products without opening every pack.
Cleaning requirements must match the selected surface, valve, and seam structure. Do not apply one disinfectant, soaking, machine-washing, or high-temperature method to every inflatable mattress. State the intended cleaning workflow and test the surface, printing, valve, and seams on the sample.
A repair kit is not automatically included. If field patching is planned, confirm repair material, tools, instructions, quantity per batch, and staff training, and define which damage can be repaired or must be written off. This connects repair capacity, spare quantity, and repeat purchasing to the same budget.
Bulk acceptance should not stop at counting packs. First define the failures that would disrupt the project: inability to inflate, valve back-leakage, seam leakage, abnormal chambers, missing accessories, difficult deflation, or inability to return the mat to its storage bag. Each failure changes immediate issue, rework, and spare-quantity decisions.
An inspection record should connect product identification, inflation equipment, operating conditions, start and finish times, measurements, visible abnormalities, and disposition. When a problem appears, record the affected packages and batch instead of keeping only a pass/fail result. This helps distinguish an operator issue, accessory issue, or batch-level structural problem.
Separate receiving acceptance from post-use inspection. Receiving focuses on quantity, appearance, valves, components, labels, packing, and agreed tests. Post-use checks focus on valve reset, chamber change, seams, contamination, patching, and repacking. Assigning both responsibilities in the procurement document avoids confusing use damage with a delivery defect and gives claims, repair, replenishment, and write-off one record basis.
No. Confirm dimensions, weight, packed form, components, and packing separately.
Provide user capacity, quantity, destination, deployed and storage limits, inflation equipment, valve or accessory requirements, labels, packing, and acceptance method. If exact values are not decided, describe the operational limits so YRF can organize the remaining confirmation fields.
No. Built-in foot pumps are a paid upgrade option, not standard. Confirm pump type and valve interface with the selected product and sample; external pumps are standard for most bulk orders.
No. Confirm composition and performance through material specifications and applicable third party test reports.
Fully inflate at 20-25℃, rest 2 hours for material stretch, top up, then rest 24 hours, pressure loss ≤5% is qualified. Test per agreed method and sample, not by visual check alone.
Review inflation, deflation, valves, chambers, seams, dimensions, 24h air retention, packing, components, labels and carton.
Pricing changes with structure, dimensions, material, valve or pump, accessories, customization, packing, quantity, and Incoterm. YRF quotes the confirmed product and delivery scope separately, and the quotation normally states a 30-day validity period.
Keep the previously approved specification, sample, measurements, tests, labels, and packing records, then compare every valve, chamber, dimension, and accessory change against the new order.
Samples are arranged after buyer prepays sample cost and freight. Sample cost is calculated per specification and can be credited against bulk orders meeting agreed terms. Blank in-stock samples ship in 1-2 days, custom samples take 7-10 days.
Standard lead time 7-15 days, emergency orders enter production in 72 hours; final lead time confirmed per order quantity and customization.
Calculate mattresses from actual sleeping spaces per site, count pumps, adapters and repair kits separately by team and power access. Do not assume one pump per mattress.
Yes, SGS/BV/Intertek inspection can be arranged per your requirements, cost borne by buyer. 24h air retention, cold bend and tensile test reports available for tender orders.
Yes, use smooth gloss PVC models without flocking, rounded corners; they can be wiped down with standard disinfectants. Flocked home models are not suitable for medical settings.
Standard PVC works above 0℃; for below freezing deployments use cold rated PVC or TPU upgrade which passes -10℃ cold bend test without cracking.
3-5 years stored dry cool out of sunlight; standard models withstand 50+ normal inflate/deflate cycles; fully dry before long term storage, do not store folded below freezing.
Yes, matching PVC repair patches are available as paid option; patches adhere best above 5℃; large seam damage or valve failure is not field repairable.
Provide buyer type, use, user capacity, quantity, destinations, selected model, deployed and packed dimensions, weight, fabric and airtight layer, chambers, valves, inflation method, components, performance-test requirements, samples, labels, packing, and acceptance method. YRF can then return comparison fields, sample checkpoints, and label and packing requirements before quotation for your emergency inflatable mattress project.
|
Submit your inflatable mattress requirements, get full specification sheet, formal quotation and sample application guide within 24 hours.
|
 |
 |
YRF Textile | 20 Years Emergency & Public Health Textile Manufacturer
Copyright © Custom Disaster - Relief Bedding: Tents, Sleeping Bags, Blankets All Rights Reserved
the professional team to service !
