Firefighter Rubber Boots Anti-slip Impact-resistant Fire Rescue

Core Selling Points
Comprehensive Protection: Made of high-strength rubber with triple protection against slipping, impacts, and punctures. Puncture test protection rate reaches 99%, effectively resisting sharp object injuries.

Heat-resistant Design: Special rubber formula withstands temperatures up to 300°C and maintains shape for 20 minutes in fire scenes, ensuring firefighters' safe evacuation.

Electrical Insulation: Passes 1000V electrical insulation tests with a 15mm thick rubber bottom layer, protecting firefighters from electrical hazards.

Anti-slip Performance: Sole features 4mm deep herringbone anti-slip pattern with a friction coefficient of 0.82 on wet surfaces, 40% better grip than standard boots.

Reinforced Protection: Steel toe cap withstands 200J impact force, with thickened ankle design for joint safety.

Share your project with us to learn more.

Material Process Details
Comprehensive Protection: Made of high-strength rubber with triple protection against slipping, impacts, and punctures. Puncture test protection rate reaches 99%, effectively resisting sharp object injuries.
Heat-resistant Design: Special rubber formula withstands temperatures up to 300°C and maintains shape for 20 minutes in fire scenes, ensuring firefighters' safe evacuation.
Electrical Insulation: Passes 1000V electrical insulation tests with a 15mm thick rubber bottom layer, protecting firefighters from electrical hazards.
Anti-slip Performance: Sole features 4mm deep herringbone anti-slip pattern with a friction coefficient of 0.82 on wet surfaces, 40% better grip than standard boots.
Reinforced Protection: Steel toe cap withstands 200J impact force, with thickened ankle design for joint safety.


Color/Style Display
Yellow-black color scheme standard firefighting warning colors with bright yellow boot shaft and black protective areas improve visibility by 70% in smoky environments for better team identification and coordination. Reflective strips on both sides of the boot shaft provide visibility up to 100 meters in dark environments, significantly enhancing night operation safety.

Application Scenarios
Building Fire Rescue: When entering fire scenes, the heat-resistant sole allows firefighters to walk safely on 300°C hot surfaces. Anti-slip design ensures quick evacuation on wet stairs, reducing slip accidents by 85% annually.

Chemical Plant Accidents: In corrosive environments, the boot's corrosion resistance reaches K3 grade, resisting 90% of common chemicals while maintaining protective performance during 8-hour continuous operations.

Forest Fire Fighting: high tube design provides full protection for the calf against burns and scratches, maintaining stable support and comfort even during daily 15km treks over rough terrain.

You Need One-Stop Emergency supplies?  Click Here to Learn More.

Usage Steps

Check boots for damage before wearing and ensure the interior is dry and free of foreign objects. Use both hands to open the boot shaft and insert foot in one motion to a comfortable position. Tap the ground lightly to ensure the heel is fully seated. After use, rinse exterior dirt with clean water and air dry in a ventilated area. Avoid direct sunlight and high-temperature drying to extend service life to 3 years.

Don't hesitate to share your idea with us by clicking here.

Maintenance Guide

Regularly check sole wear—replace when wear depth exceeds 2mm. Store in a dry, ventilated place away from heat sources and direct sunlight, avoiding contact with sharp objects. Clean outer surface with neutral soap solution after each use and disinfect interior with 75% alcohol. Apply specialized rubber care products regularly to extend boot life to 3 years or 600 hours of intensive operation with standard maintenance.

Q: How effective is the anti-slip feature of these firefighter boots?
A: 4mm deep herringbone pattern provides 0.82 friction coefficient on wet surfaces - 40% better grip than standard boots.

Q: What temperature can these firefighter boots withstand?
A: Heat resistant up to 300°C, maintaining shape for 20 minutes in fire scenes to ensure safe evacuation.

Q: What is the electrical insulation capacity of these boots?
A: Pass 1000V electrical insulation tests with 15mm thick rubber bottom layer protecting firefighters from electrical hazards.

Q: How much do these firefighter rubber boots weigh?
A: Each pair weighs 1.8kg - lightweight design for maximum mobility during extended rescue operations.

Q: What impact protection do these firefighter boots offer?
A: Steel toe cap withstands 200J impact force, fully compliant with firefighting rescue standards.

Q: What's the purpose of the yellow-black color scheme?
A: Increases visibility by 70% in smoke, complies with international standards, and enhances team coordination.