Polar Fleece Emergency Blanket for Equipment and Bulk Supply

✅ 20 years of emergency textile manufacturing.

Annual capacity 1.2 million emergency blankets. Total 3 million+ pieces delivered to 30+ countries.

We supply government disaster projects, NGO programs and national stockpiles through partner traders.

Products meet UN/Red Cross quality standards.

We have delivered up to 150,000pcs of polar fleece equipment blankets within 10 days for international emergency kit projects.

We do not pay for annual GRS factory certification. 90% of orders do not need it, saving you unnecessary cost.

If your project strictly requires GRS, we can arrange it separately with clear extra cost and lead time.

All orders support SGS/BV/Intertek third party inspection.

72-hour emergency production scheduling. Strict production against sealed samples.

Let the equipment space define the open size

An emergency kit, vehicle compartment and duty locker have different space limits. Selecting a conventional blanket first and forcing it into the available space often produces an impractical pack. The equipment buyer should provide the permitted packed length, width and height, together with the required open coverage. A folding or pouch sample can then preserve both measurements in one order record instead of relying on a photograph labelled “compact”.

Equipment-fit records should capture internal length, width and height, opening clearance and any protruding divider or anchor. External case dimensions can hide lost usable space. The trial uses the complete blanket and every ordered component, then performs insertion, closure, removal and repacking while noting whether excessive force or removal of other equipment is required.

Configuration recommendations by equipment use scenario

Choose exact specification based on your equipment use case. All configurations are tested for exact fit.

1. Standard emergency kit / first aid kit insertion

Recommended: 200GSM, 130x180cm, lock edge, vacuum compressed, no pouch, 50pcs/carton.

Why this works: Compressed size 22x18x8cm, fits most standard civilian and UN emergency kits exactly. No extra pouch bulk, opens in 2 seconds.

Warning: Blankets thinner than 180GSM will be see-through, cannot pass emergency kit inspection.

2. Vehicle / car emergency kit standby

Recommended: 200GSM, 130x180cm, double-needle edge, oxford pouch with plastic clip, 20pcs/carton.

Why this works: Pouch with clip hangs on car seat back or trunk hook, no sliding. Pouch is tear-resistant, survives 3 years in car temperature changes.

Core test: We test pouch clip for 5kg load, no falling after 1000 times of taking out and putting back.

3. Personal outdoor / duty gear

Recommended: 220GSM, 130x180cm, reinforced edge, compression stuff sack with adjustable strap, 40pcs/carton.

Why this works: Compresses to palm size, fits in backpack side pocket. Anti-pilling finish, no lint on uniform or outdoor gear.

✅ View the Recycled Polyester Blanket for Emergency Relief and Bulk Supply, an eco‑friendly practical product for institutional bedding bulk procurement. This recycled polyester relief blanket delivers reliable warmth, good tear strength and low‑cost advantage, suitable for long‑term emergency stockpile storage, repeated washing and large‑scale distribution in humanitarian missions. We provide tender‑compliant datasheets, pre‑shipment sample approval, custom branded packaging and consolidated container shipment for buyers sourcing bulk blankets and disaster relief blankets. Perfect for government emergency reserves, NGO relief programmes, refugee camps and temporary institutional accommodation projects.

4. Duty post / guard booth standby

Recommended: 240GSM, 130x180cm, fabric binding edge, wall-mount hook strap, 10pcs/carton.

Why this works: Thick enough for 10-15°C outdoor duty, wall-mount strap for easy storage, no creasing after long time hanging.

5. Home emergency reserve

Recommended: 200GSM, 130x180cm, lock edge, individual PE bag, 50pcs/carton.

Why this works: Folded to book size, stores in drawer or emergency go bag without taking space. No extra pouch cost, affordable for household stock.

Inspect the fleece after it has been stored under pressure

A textured fleece surface may flatten, crease or locally compact after repeated folding and pressure. Sample review should include first opening, opening after representative storage and inspection of whether the edge or label interferes with folding. Where a project requires numerical recovery, pilling, lint or wash-cycle claims, the method and document must apply to the proposed product. General values from a material reference are not enough.

The pressure-storage record identifies the fold, pouch, compression method, duration, environment and observation time after opening. Review pile marks together with edge distortion, label damage, hard creases and the time needed to repack the set. A result applies only to the current 130×180cm, 200 GSM sample and its selected pouch.

Order Terms

Order Terms:
MOQ 500 units. Lead time: 10-15 days for standard orders, 15-20 days for large bulk orders, 20-35 days for customized items. Standard quotations are generally available on EXW, FOB or CIF terms; DDP can be evaluated for selected destinations according to the country, product and order requirements.

50% deposit will be required upon order confirmation to start production, and full balance to be settled before shipment.

Flexible payment arrangement can be discussed for institutional buyers and emergency relief tender projects. Government/NGO projects support sight L/C and Sinosure.

✅ Explore our preparedness essentials of emergency bedding for institutional bulk bedding procurement to equip temporary emergency shelters. Our product range covers complete emergency bedding sets bulk, including fitted sheets, flat sheets, duvet covers and pillowcases made for disaster response scenarios. These durable, easy-to-clean bedding products are designed for refugee camp shelter, humanitarian aid deployments and government emergency stockpile programs. As a trusted institutional bedding supplier, we support tender bulk orders, custom labeling, mixed-container shipment and matched shelter packages for all disaster relief operations.

Avoid 9 industry hidden traps for equipment blankets

These are common problems buyers find after receiving goods. Most suppliers do not mention them, and you can test them yourself in 10 seconds.

1. Folded size fraud: Suppliers quote vacuum-extreme compressed size as regular folded size. You will never fold it that small by hand, and it will not fit your kit. How to check: Ask supplier to fold sample by hand without vacuum, measure 3 dimensions, then insert into your actual kit. Do not trust vacuum size for regular use.
2. Compression no rebound: Suppliers use recycled fleece material. New sample looks fluffy, but after 3 months compressed in kit, it hardens like cardboard and cannot fluff up. How to check: Fold sample, press under 5kg weight for 7 days, open and check. New 100% virgin fleece rebounds to ≥90% thickness in 10 seconds. Recycled material stays flat.
3. Pouch tear easily: Thin non-woven pouch tears when pulling blanket out in emergency. We use 210D oxford pouch for all equipped versions, passes 50 times pull test.
4. Clip/strap break: Cheap plastic clip breaks in -10°C low temperature, strap falls off when hanging in car. We test clips at -10°C for 5kg load, no break.
5. GSM fraud: Quote 200GSM grey fabric weight, finished fabric only 170-180GSM after washing and shrinking. How to check: Cut 10x10cm from middle of sample, wash and dry, then weigh. 200GSM finished fabric should weigh 2g exactly for 10x10cm piece.
6. Excess lint: Fleece sheds lint all over uniform, car seat or other gear. All our polar fleece goes through 2 times lint removal process, lint loss ≤1% after 10 washes.
7. Label blocks fold: Label sewn in wrong position, creates hard lump when folded, cannot fit into pouch. We test label position on every sample before bulk production.
8. Color fade in sun: Blanket kept in car fades after 1 month sun exposure. Our color fastness to light ≥Grade 4, no obvious fade after 3 months in car.
9. Short of accessories: Pouch/clip marked as included but missing in bulk. We count every set before packing, missing one accessory triggers full re-count.

Mandatory health and safety red line:

All blankets meet OEKO-TEX Standard 100 direct skin contact requirements.

Medical waste fiber and second-hand recycled materials are strictly prohibited.

No harmful substances, no odor, no fluorescent agents. Lint loss ≤1% after 10 washes, no skin irritation for long-term use.

Low temperature resistance to -10°C for vehicle use. We never overstate temperature range.

Orders we do NOT accept:

❌ Orders requiring 200GSM price but 240GSM thickness

❌ Orders asking us to pretend to be UN/Red Cross direct supplier

❌ Orders asking for fake certificates or fake test reports

❌ Orders claiming "fits all kits" without actual size test

❌ Orders asking us to overstate temperature range, e.g. claim 200GSM works for -20°C

Core Specs

• Base material: 100% polyester polar fleece
• Standard open size: 130×180cm
• Fabric weight: 200 GSM (after wash and dry)
• Referen
• ce finished sample weight: approximately 0.78kg per piece, excluding pouch
• Standard colours: olive drab, dark grey and black
• Double-needle reinforcement at stress points, with batch traceability and QC serial numbers
• Pouch, clips, straps and mounting accessories are optional and are not included by default

These are reference standard specifications. GSM is fabric weight per square meter; 0.78kg is the reference finished sample weight excluding the pouch. They are not interchangeable, and final specifications follow the approved pre-production sample. Packed volume, temperature adaptability and recovery data are provided from actual sample tests.

Specification comparison for different polar fleece equipment blanket models

Parameter	200GSM Basic Kit Model	200GSM Vehicle Model	220GSM Outdoor Duty Model	240GSM Guard Post Model
Fabric GSM (after wash)	200GSM	200GSM	220GSM	240GSM
Open Size	130x180cm	130x180cm	130x180cm	130x180cm
Finished Weight	~0.78kg/pc	~0.85kg/pc (with pouch)	~0.88kg/pc (with stuff sack)	~0.95kg/pc (with strap)
Edge Craft	Lock edge ⚠️ Not for repeated wash	Double-needle lock edge	Reinforced lock edge	Fabric binding edge
Accessories	None, vacuum packed	210D oxford pouch + plastic clip	Nylon compression stuff sack + adjustable strap	Wall-mount hook strap
Folded Size (hand fold, no vacuum)	24x20x10cm 22x18x8cm vacuum	25x20x10cm (in pouch)	15x10x10cm (compressed)	30x25x5cm (folded)
Typical Use Case	Standard emergency kit insertion, home reserve	Car / vehicle emergency kit	Personal outdoor / on-duty gear	Guard post / duty booth standby
Cost Saving Tip	Cheapest, no extra accessory cost	Best value for vehicle use	Smallest packed size for carry	Thickest for low temperature duty

• 130×180cm portable configuration for emergency kits, vehicles and personal equipment
• Open coverage and folded volume reviewed on the same physical sample
• Pouch, clips and mounting components confirmed as separate order items

• Product configuration: 100% polyester polar fleece; the 130×180cm open size, 200 GSM, approximately 0.78kg reference finished weight, folded volume and optional accessories are locked against the equipment space and approved equipment sample.
• Construction and documents: all stress points use double-needle reinforcement. The standard configuration is OEKO-TEX Standard 100 certified, with applicable SGS-related test reports, full batch traceability and QC serial numbers available.

Portable and regular-coverage configurations solve different jobs

Decision	Portable equipment configuration	Regular coverage configuration
Primary constraint	Packed space, carry method and rapid access	Open coverage and rest-area use
Size selection	Measure the compartment before fixing open dimensions	Define the user or bed before selecting the fold
Packing	Pouch, strap or individual pack may be considered	Standard folding and carton allocation may be used
Label position	Must not obstruct opening or create pressure points	Supports warehouse identity and replenishment
Acceptance	Access, opening condition, dimensions and accessories	Appearance, size, weight basis and packing consistency

List the pouch and mounting accessories as separate options

Oxford or nylon pouches, clips and mounting systems become deliverables only when selected in the order. A mounted configuration needs the attachment position, load method, pouch dimensions, closure and identification requirements. Where mounting is unnecessary, a simpler individual pack may improve carton efficiency. Institutional emblems and logos require lawful buyer authorization and must not be copied from reference images.

The component schedule lists the blanket, pouch, clip, strap, label and instruction card separately, with material, quantity, attachment point and replacement condition. Receiving teams can count complete sets,     while distributors can distinguish a missing pouch from a blanket replenishment instead of treating every optional part as standard supply.

Define the wind and use boundary before adding performance options

A lofty fleece structure is not the same as a wind barrier. Outdoor buyers should consider wind exposure, clothing layers, temporary rest duration and the rest of the insulation system. Flame-retardant, anti-static, reflective or water-repellent requirements should be written as separate conditions with a named standard, test scope and applicable sample. Without that support, the order remains an ordinary polar-fleece configuration.

Sheltered vehicle storage, indoor duty use and exposed wind are separate boundaries. The standard model provides portable temporary coverage; 200 GSM is not converted into a fixed temperature claim, and quick drying is not substituted for a specified drying test. Quotations separate the base blanket from each performance option.

Professional term explanation (save you cost, avoid being cheated):
1. Anti-pilling finish: Special treatment to prevent fleece from forming small balls after friction. Industry cheat: Many suppliers only test dry pilling, not wet pilling, so balls appear after first wash. Grade 3 acceptable for one-time kit use, Grade 4 needed for repeated outdoor/duty use. Do not pay extra for Grade 4 for one-time kit use.
2. Compression rebound rate: Percentage of fleece thickness recovered after opening from compression. Industry cheat: Most suppliers test rebound after 1 hour compression, not 7 days real storage. ≥90% rebound in 10 seconds after 7 days compression is qualified. Lower rate means blanket stays flat after storage.
3. Pouch material: Non-woven pouch is cheapest but tears easily; 210D oxford is standard for vehicle use, tear-resistant; 420D nylon for heavy outdoor use. Choose by use case, do not over-specify.
4. Double brushed vs single brushed: Double brushed fleece is softer on both sides, costs 10% more. Single brushed enough for one-time kit use, no need to pay extra.
5. Low temperature resistance: Standard polar fleece gets hard below -10°C. If used in extremely cold areas, add anti-freeze treatment. Never believe claims that 200GSM regular fleece works below -15°C.

Standard sample & certification policy:
Regular sample fee 30-50 USD/pc, sample + shipping cost prepaid by buyer. Fully deducted when order reaches 10,000pcs or total amount over 50,000 USD. Sampling takes 3-5 working days.
Project-specific testing/certification (extra SGS items, flame retardant, GRS, anti-static etc.) fee prepaid by buyer, fully deducted under same order threshold. Official report issued in 7-10 working days.

Judge polar fleece structure from the actual use

Apolar fleece emergency blanket may serve vehicle readiness, personal equipment packs, institutional rest points and temporary coverage. Those tasks require different area, weight, folded volume and surface recovery. Procurement should define storage space and coverage duty before choosing open size, target weight and packing instead of beginning with unsupported conclusions such as portable or warm.

Portable and coverage versions are different configurations

A portable version emphasizes folded size, unit pouch and rapid access. A regular-coverage version emphasizes open area, edge stability and user experience. A pouch, strap or mounting accessory must be confirmed as a separate included-component field and is not automatically included. We can prepare alternatives so buyers can compare carrying cost with practical coverage.

Checking recovery after packed storage

Pack the sample in the planned format, retain it for an agreed period and then inspect opening, pile pressure marks, permanent deformation, odour, bag failure and label condition. The method and environment belong in the project record, and the result applies only to that material, fold and pack combination. No fixed recovery rate or storage life is promised without validation.

Boundaries for wind and temperature wording

Experience in exposed wind differs from stationary indoor use. Material name or GSM must not be converted directly into a fixed operating temperature. Where temperature or thermal-resistance data is required, define the test method, sample configuration and use condition first, then apply only the corresponding result.

Return both product and packing fields in the quotation

The equipment-set response should cover material, dimensions, weight basis, colour, edging, accessories, unit bag, carton quantity and packing-trial status. Equipment buyers can then assess equipment space, freight and issue efficiency. Loading quantity is provided after the final specification and packing trial.

For multi-site equipment distribution, the split list can follow vehicle numbers, kit identifiers or receiving units. Outer labels match the set count inside, while the QC reference connects the blanket batch with its accessory confirmed version. Replenishment checks the existing pouch clearance before deciding whether to replace only the blanket or the complete set.

Order specification decisions for Polar Fleece Emergency Blankets

An equipment quotation must answer two questions together: whether the blanket provides enough open coverage and whether the packed set fits its assigned space. We lock the following points into one reproducible kit version:

• RFQ required: Confirm open coverage dimensions and available folded space, we return measured open size and packed 3 dimensions after fit test
• Before production: Agree compression storage test standard and accessory list, we do pressure trial and count all accessories one by one
• Before packing: Confirm use boundary (indoor/sheltered/exposed), we match corresponding performance standard
• Project option: Confirm carton quantity after final pack, we provide exact measured carton size and loading quantity

Our specific quality control actions (90% of suppliers do not do these)

1. Raw material inspection: Cut 1m from each fabric roll, wash and dry, test GSM, anti-pilling grade and color fastness, unqualified fabric returned directly. Most suppliers skip this because it wastes fabric and takes 1 extra day per batch. We provide raw material test report.
2. Folded size test: Fold every production sample exactly as bulk hand fold, measure 3 dimensions, test insert into standard kit/pouch, adjust fold if it does not fit. Most suppliers only measure open size to save labor. We provide fit test record.
3. 7-day compression rebound test: Compress 5% of samples for 7 days under 5kg weight, open and test rebound rate, adjust fabric if rebound is below 90% in 10 seconds. Most suppliers only test 1-hour rebound because 7-day test occupies warehouse and delays delivery. We provide rebound test record.
4. Accessory strength test: Test pouch tear strength, 5kg clip load bearing, strap pull strength, test clips at -10°C for low temperature resistance. Most suppliers only do visual check to save test cost. We provide accessory test report.
5. Double lint removal: Every blanket goes through 2 times lint blowing machine, remove all floating lint, no lint on gear or uniform. Most suppliers skip this to save electricity and labor. We keep production record.
6. Label position check: Check label position does not create hard lump when folded, does not block pouch insertion. Most suppliers sew label randomly. We keep in-line inspection record.
7. Final inspection per AQL 2.5: Check size, weight, folded size, rebound, accessories, packing, count every set to avoid missing accessories, support third party inspection. Most suppliers do not count accessories one by one to save labor. We provide final inspection report.
8. Loading check: Check packing, marks, quantity, take loading photos. Standard process, we provide packing list, loading photos and B/L.
9. Repeat order re-test: Re-test folded size and fit with existing pouch before production, no silent material or craft changes. Most suppliers change material without telling customers. We provide updated quotation and production plan.

Equipment-pack outputs before production

The pre-production kit contains the open blanket, packed-dimension record, itemised accessories, label position and pressure-opening record. A change to blanket dimensions, pouch or mounting method triggers a fresh equipment-fit and carton check.

Final polar-fleece order decision

The final choice balances two failure modes: loose folding consumes assigned equipment space, while excessive compression can slow opening and distort the fleece surface. Test one complete set inside the actual compartment, including every ordered accessory, before fixing the bulk version.

Questions about polar fleece emergency blankets

What is needed for a first quotation?

Send quantity, destination, the standard model or available storage space, and whether a pouch or mounting part is required. We first check whether the 130×180cm model fits, then identify any custom fields.

Will this blanket fit an existing emergency kit?

Catalogue dimensions are not enough. Provide the compartment clearance so we can insert, close and remove one complete folded set without the pouch, label or clip blocking access. We offer free fit test for your actual kit sample.

Why is packed volume confirmed by a trial?

Open size, 200 GSM fabric, folding pattern, pouch and compression level all change the result. Bulk packing data comes from the final blanket and selected pouch tested together.

Does the standard model include a pouch or clip?

No. Pouches, clips, straps and mounts are quoted line by line. Only components listed in the order inclusion schedule ship with the blanket.

How is opening condition checked after pressure storage?

Store the complete sample pack under the agreed pressure and duration, then record creases, pile marks, edge shape and repacking effort. The result applies only to that blanket, fold and pouch combination.

Can polar fleece be treated as windproof?

No. The material name and 200 GSM do not establish wind resistance. Exposed use needs a separate wind barrier or a named test for the intended combination.

Are flame-retardant, anti-static or water-repellent properties standard?

No. Each is a project option that requires a named standard, test scope and matching sample construction before it enters the order.

How do replenishment orders preserve equipment fit?

The repeat-order file retains the blanket, packed dimensions, pouch sample, component schedule and label position. Any change triggers another insertion, removal and carton check.

What is the exact folded size for standard emergency kit insertion?

200GSM basic model hand folds to 24x20x10cm, vacuum compresses to 22x18x8cm, fits most standard UN and civilian emergency kits. We can adjust fold for custom kit sizes for free.

Will the pouch break in cold weather?

All vehicle model pouches use 210D oxford fabric, clips are tested at -10°C for 5kg load, no break or crack. For extremely cold areas we can provide low-temperature resistant clips.

Will the lint get on my uniform or car seat?

All blankets go through 2 times lint removal, anti-pilling Grade 4, lint loss ≤1% after 10 washes, no obvious lint on clothes or seats.

Your price is $0.15/pc higher than other suppliers, why?

We test actual hand-folded fit, use tear-resistant pouches, test 7-day compression rebound, count every accessory. You will not receive blankets that do not fit kits, broken pouches or flat non-fluffy blankets, which costs far more than $0.15/pc in rework.

How many pieces can you deliver in 10 days for emergency kit projects?

Standard olive drab/dark grey/black 200GSM basic model, we keep grey fabric in stock, maximum 150,000pcs in 10 days. Custom colors or accessories need 15-20 days.

What if bulk does not fit our kits?

If third party inspection proves bulk hand-folded size does not match sealed sample and cannot fit your kits, we will re-produce for free or fully refund, and bear round trip shipping cost, written in sales contract.

Do you support neutral packing? Will you contact our customers?

We fully support neutral packing, customer brand and labels. We never put our contact information in goods, never contact your customers directly. Your customer resources are 100% protected.

Can we print our logo or custom label on the blanket/pouch?

Yes, custom logo printing, woven label, hangtag are all available. MOQ for custom logo is 1000pcs, no extra mold fee for simple printing.

Will the blanket deform or pill after wash?

Double-needle edge model supports 10+ times machine wash, no deformation, pilling ≥Grade 4. Basic lock edge model is for one-time emergency use, not recommended for repeated wash.

✅ Browse the Emergency Relief Reserve Blanket for Institutional Stockpiles and Bulk Distribution, a core standby product for institutional bedding bulk procurement. This emergency relief reserve blanket is engineered for long‑term stockpile rotation, compression storage and large‑scale bulk distribution, maintaining stable warmth performance even under harsh field conditions. We deliver tender‑ready technical documentation, pre‑shipment sample inspection, custom private‑label packaging and consolidated container shipment for procurement teams sourcing bulk blankets and disaster relief blankets. Well‑suited for government emergency stockpiles, correctional facilities, military camps, refugee and IDP shelter humanitarian deployments.

Define a polar fleece equipment configuration

Required information

• Quantity
• Destination
• Standard configuration or available storage space
• Whether a pouch, clip or other accessory is required

Optional information

• Use boundary and special performance requirements
• Colour, label and packing
• Applicable test or document requirement

Send us these information, we will reply within 24 hours with:

• Official detailed quotation
• 3pcs different configuration ready-made samples (you only pay shipping cost)
• FREE fit test for your actual emergency kit/pouch sample
• Same type emergency kit project acceptance standard reference
• Exact carton load calculation to help you plan freight

Continue the Procurement Decision

Emergency Relief Blanket Bulk Supplier Compare related blanket product lines and procurement routes.	180GSM Polyester Flannel Bulk Distribution Blanket Compare this related blanket option with the current configuration.

Field Logistics & Camp Blanket Supply  Solution for Standby Rest Areas Review product selection, packing and supply planning for this application.	How to Verify Blanket Packing and  Labeling Before Shipment Read the related buyer guide before confirming specifications and packing.

✅ Check this wholesale flannel blankets FAQ, built for humanitarian, NGO and institutional buyers sourcing bulk relief blankets and disaster relief blankets bulk. We answer frequent questions covering MOQ, GSM, fabric weight, standard sizes, production lead time, compression packaging, relevant certifications and bulk relief pricing. This FAQ helps procurement teams clarify specification requirements, compare flannel blanket options and prepare tender documents for disaster relief and emergency shelter supply projects.

YRF Textile | 20 Years Emergency Relief Manufacturer