Portable LED Construction Floodlight IP65 Outdoor for Small Worksites

Portable LED Construction Floodlight IP65 Outdoor for 

Small Worksites

For worksites up to 1000 m², the construction site floodlight is the one-person answer: three lamp heads, a telescopic mast and an optional generator. One worker raises this portable construction floodlight in minutes, no trailer needed.

Table of Contents
Construction Site Floodlight: What It Is and How It Works
Portable Construction Floodlight: SFW6133 vs SLW6110 Compared
IP65 Construction Floodlight Specifications
Portable Construction Floodlight: Rapid Setup
Portable Construction Floodlight Power: Mains or 1000W with Generator
Construction Site Floodlight: Four Night Scenarios
Construction Site Floodlight: Portability and Rotation
Construction Site Floodlight Customization: SLW6110 Power and Branding
Operation and Maintenance of the IP65 Floodlight
Construction Site Floodlight or Light Tower
Construction Site Floodlight Decision Tree: Portable or Tower
Construction Site Floodlight FAQ
Construction Site Floodlight: Get a Quote

Two platforms share the same pole. The lightweight construction site floodlight delivers 600W across three 200W lamp heads, IP65 sealed and rated for level-8 wind. The generator version steps up to 1000W from three 250W heads, with a built-in gasoline engine that keeps the night shift running off one 13 L tank. Pick the mains model where sockets exist. Pick the generator model where the grid has not arrived yet. Both fold into narrow transport sizes two workers can move between pickets.

The choice between them comes down to three questions, and every construction site floodlight buyer weighs the same three. How large is the work area? Is mains power available on site? How often do you move between sites? For 500 to 1000 m² zones with a socket nearby, the 70 kg mains unit is the simple answer. For off-grid night shifts that must last a full watch without refuelling, the 180 kg generator version carries the 2KW/3KW engine that the smaller model leaves at home.

Both versions climb on the same idea. A telescopic mast raises the lamp heads clear of scaffolds and stacked materials. The mains version reaches 4.8 m on its raised frame. The generator version adjusts smoothly from 1.7 m to 4.5 m. At that height the three heads spread a broad, even pool of light across the small work zone, so crews work under coverage rather than fighting shadows on the ground. No dark corners, no squinting, no moving the lamp every ten minutes to follow the crew.

It is eight p.m. on an 800 m² interior renovation site. Mains power has not reached the floor, and a trailer light tower cannot fit through the gate. A single integrated construction site floodlight turns the whole zone bright within minutes: one person opens the legs, raises the pole, and plugs in or starts the engine. Pick the 600W mains unit where a socket is close; pick the 1000W generator unit where the grid has not arrived. Two people fold it back onto the van when the shift ends.

Construction Site Floodlight: What It Is and How It Works

The 1000W floodlight with generator pairs with an IP65 construction floodlight for wet shifts. The mains powered 600w construction floodlight suits sockets nearby, the 1000w floodlight with generator runs all night, and the ip65 floodlight with gasoline generator shrugs off rain.Two working platforms share this construction site floodlight single-pole design, and each one folds down to a size that fits through a doorway or into a small truck bed.

The single-pole design matters on site. Unlike a handheld work light strapped to a tripod, this construction site floodlight lifts three heads together to 4.8 metres, raking a wide slab instead of a tight circle. One operator unfolds the legs, locks the pole, and tilts the heads in under two minutes. For night construction site lighting, that means the light pool arrives with the crew, not half a shift later.

This construction site floodlight sits between a portable work light and a towable diesel light tower. Small sites get broad coverage from this mobile floodlight for construction site crews without the trailer.

Small sites rarely need the same machine twice. A socketed urban infill runs quietly on 600W, while an off-grid yard burns gasoline through a 1000W floodlight with generator until dawn. The portable construction floodlight range keeps one chassis, one mast and one habit, so crews trained on either version switch without a manual. Order by site power first, then area, then runtime, and the chassis choice narrows by itself.

Two models share this page. The SFW6133 is the lightweight 600W version: three 200W heads, a 30W talk horn, IP65 sealed, weighing 70 kg.

The SLW6110 floodlight is the generator version: three 250W heads on a 1000W platform, driven by a 2KW/3KW gasoline engine, weighing 180 kg. Below we call them the lightweight version and the generator version.

This construction site floodlight ships factory-direct and is widely adopted in public infrastructure projects. Wherever small zones need fast, weatherproof light, this unit earns its place in the site kit.

This is why the construction site floodlight has become the standard kit for small urban projects. No separate generator, no separate mast, no separate lights on one pallet. One machine does all three jobs.

Numbers decide the choice. Rated watts, head count, fuel runtime and collapsed dimensions are what a procurement officer signs off on, not brochures. The table below pairs each specification with the real site condition it answers: ceiling height for raised mast length, socket availability for generator choice, rotation frequency for the lighter 70 kg chassis. Compare both rows, and keep the sheet open when you ask the factory for a configuration answer.

Portable Construction Floodlight: SFW6133 vs SLW6110 Compared

The two construction site floodlight models share the same pole, the same IP65 heads and the same level-8 wind rating. They split on power, fuel and weight.

Every line of this construction site floodlight choice lands in the table below.

The portable construction floodlight lightweight version runs on 600W from three 200W heads. Its 30W talk horn lets the foreman call instructions across the yard.

Collapsed it measures 390×645×1450 mm. Raised, the pole reaches 4.8 m. The whole unit sits at 70 kg, built for one-person moves between rooms or small yards where a socket is close.

The 1000W floodlight with generator runs three 250W heads. Its built-in 2KW/3KW gasoline engine powers the night with a 13 L tank rated for at least 13 hours.

Collapsed it measures 1650×510×780 mm, and its mast adjusts smoothly from 1.7 m to 4.5 m. At 180 kg it stays mobile, rolling on its wheels from one hot spot to the next.

The logic is simple. Mains nearby, small area, frequent moves: the lightweight version wins. No mains, long runtime, larger zone: the generator version wins.

Those same figures feed the comparison table. Raised height, collapsed footprint, fuel tank capacity and lamp array are not marketing labels; they determine whether the unit fits the gate, runs through the watch and lights the zone you actually work. Read the two columns as one decision: 600W mains for predictable sockets, 1000W generator for yards where the grid never reaches. Add gate width and crew size to close the loop.

The depot frame above is where the numbers start to matter. A night yard that looks warm and steady on camera is actually a stack of rated choices: watts per head, tank litres, mast height, collapsed footprint. The table below condenses those choices into two columns so a buyer can compare the portable construction floodlight mains version against the generator version without flipping pages, chasing brochures or calling back the supplier.

That first table fixes the machine; the close-up frame fixes the build. Look at the lamp cluster: three rectangular silver-grey heads on one shared bracket, a 30W horn bolted beside them, cooling ribs visible along the aluminium housing. This is the top of the construction site floodlight that the specification row describes, and the same assembly appears on both the 600W mains chassis and the 1000W generator chassis below.

Read both tables as a pair. The first fixes the machine size, power and runtime; the second fixes what you must check on your own site before ordering. Measure the zone, confirm the nearest socket, count the moves per week, and only then pick the column. That checklist keeps the IP65 construction floodlight from being undersized on a wet yard, or oversized on a driveway where half the light lands on empty gravel.

IP65 Construction Floodlight Specifications: Complete SFW6133 and SLW6110 Data

A mobile floodlight for construction site work is bought on numbers, not slogans. The table below lists every parameter of the standard product configuration.

Check your lighting area and site power before you request a configuration.

The studio pair sets the visual baseline. Now the complete parameter list does the talking. Every row below follows the standard product configuration for the SFW6133 and SLW6110 floodlight: lamp array, generator capacity, fuel tank, raised and collapsed dimensions, protection rating and wind class. Read the column that matches your site, and treat the other column as the fallback for nights when the grid disappears and the watch runs late.

With the full specification on the page, the detail frame below answers the question the table cannot: how does the mast actually lock? The silver collar slides up the pole and clicks into a height pin; the orange generator base below carries the engine and the control panel as one welded unit. That joint is what keeps the IP65 construction floodlight standing upright through a level-8 wind watch at two in the morning.

The IP65 construction floodlight sealed heads keep working through rain and site wash-down. Level-8 wind resistance keeps the raised pole steady in the gusty small-yard environment.

The 4.8 m rise clears scaffolds and material stacks, so the light pool lands on the work rather than on top of the pile.

At 70 kg the mains version moves by hand. The generator version trades those extra kilograms for a self-contained engine and a 13 L tank good for at least 13 hours. That is one full night shift without a refill.

Weight defines who moves it. At 70 kg the mains unit is a two-hand carry through a doorway; at 180 kg the generator version rides on its wheels, still through a standard gate, still without a tow bar. Neither machine needs a permit, a trailer licence or a dedicated driver. Setup time stays under five minutes for either, which is why this mobile floodlight for construction site work fits crews that change address daily.

IES illuminance levels for small sites help you judge whether 600W or 1000W covers your area.

Every number above is how this unit earns its place on your site list. Send the sheet to your engineers, and they will map it against the drawing before you order.

Portable Construction Floodlight: Rapid One-Person Setup and Deployment

No trailer, no outrigger parade. The construction site floodlight stands on its own support frame the moment the three legs drop flat. The whole rig folds onto a compact footprint, so one worker deploys it on a narrow gravel pad between material stacks. The IP65 sealed heads stay locked on the tilt bracket until the mast reaches the chosen 4.8 m or 1.7–4.5 m height. Within minutes the site moves from dark to working light, with no anchoring crew and no tow vehicle on the gate.

The lightweight version raises to 4.8 m. The generator version slides smoothly from 1.7 m to 4.5 m and locks wherever the foreman stops it. Height adapts to the obstacle line.

The one-person flow is short. Unfold the support legs. Pull the telescopic pole up and lock it. Plug into 220V mains, or start the gasoline generator. Tilt the three heads toward the work zone.

There is no hitch to line up and no drum of cable to chase. Quick one-person setup makes this portable construction floodlight ideal for rotating pickets.

Compared with a trailer light tower, you skip the towing, the winch and the anchoring crew. Small site rotation gets faster. Later we compare this floodlight against a full diesel tower.

Set the unit just off the work line, not inside it. The three heads then rake across the slab from the side. Shadows fall away from the tools rather than toward them. Position is half the light quality.

Portable Construction Floodlight Power: Mains or 1000W with Generator

Power choice decides where and how this construction site floodlight works. Mains mode saves fuel. Generator mode reaches anywhere the grid does not. The table compares both modes before you order.

Mains mode is the simple life. The lightweight construction site floodlight plugs into 220V and lights up. No fuel stops, no engine service, no exhaust near the crew.

Fixed yards, factory floors and permanent site cabins run this mode all season long. The only requirement is a socket close enough to reach.

Generator mode goes where no socket exists. The generator version carries a 2KW/3KW gasoline engine in its base. A 13 L tank delivers at least 13 hours of light through the night.

The IP65 heads keep working when rain starts. This mobile floodlight for construction site remote duty runs on generator mode alone.

Fixed work points lean on mains to save fuel cost. Rotating crews lean on the generator for self-contained power. Product framing follows NEMA lighting product standards. Choose by how often the site itself moves.

The dual-power diagram above splits the decision in two. Mains cable on one side, gasoline engine on the other, and the same three lamp heads on top of either chassis. The comparison table below turns that split into a checklist: where the socket lives, how long the watch runs, how often the crew relocates between gates. Fill three blanks and the chassis name writes itself, without a second quote round.

Construction Site Floodlight: Four Night Lighting Scenarios for Compact Worksites

A 500–1000 m² urban infill site has to keep working after sundown. A trailer tower cannot enter the narrow gate. This construction site floodlight rolls in, raises and lights the whole slab. The mobile floodlight for construction site night crews keeps the schedule without blocking the crane path.

Inside a renovation shell, power may still be rough and ceilings are low. The 4.8 m pole clears the scaffold frame, and the mains version plugs straight into the temporary outlet. No trailer crosses the threshold. This is the quiet value of a compact construction site floodlight indoors.

Bridge and road maintenance pickets live on a shoulder lane. The unit rides along in a small truck bed, lands on the asphalt, and spreads light across the railing line. Traffic keeps flowing on one side while the crew works on the other.

Level-8 wind resistance holds against passing traffic gusts. The mobile floodlight for construction site crews becomes the patrol lamp after dark.

Depot yards and parking lots need this construction site floodlight as a standing guard light through the watch. IP65 protection means rain does not pause the night shift. One generator version watches the stacked pallets from dusk to dawn on a single tank.

Construction Site Floodlight Portability: Moving the Mobile Unit Between Pickets

The lightweight construction site floodlight travels at 70 kg, light enough for two workers to lift over a curb or down a site stairway. Two workers carry this portable construction floodlight between pickets, or it rides behind the van seats on the way to the next job. The collapsed pole locks flush against the frame, so nothing catches on doorways or elevator doors. Roll it on its built-in wheels for short moves across the yard, and the same unit covers three small sites in one shift.

Collapsed at 390×645×1450 mm, it fits through doorways, into elevators and down narrow site lanes. A mobile floodlight for construction site rotation should not need a forklift to relocate. This one does not.

The generator version weighs 180 kg and moves on its wheels. Its collapsed size of 1650×510×780 mm slips into a small truck bed.

The extra weight on this construction site floodlight buys the built-in 2KW/3KW engine and 13-hour runtime. You trade one hand carry for self-contained off-grid power, every time the site loses the grid.

Transport prep takes a minute. Fold the lamp heads down, collapse the pole, and strap the frame before the unit rolls into the van. Nothing protrudes, nothing rattles loose on the road.

Construction Site Floodlight Customization: SLW6110 Power, Height and Branding

Spec this portable construction floodlight the way your sites need. Pick 600W or 1000W lamp output. Pick a 2KW or 3KW gasoline generator where off-grid duty is heavy.

Pick the raised height between 4.8 m and the 1.7–4.5 m range. Housing colour and LOGO coating are arranged as requested. Custom branding available on request for fleet buyers.

The flow is short. Send your lighting area, site power conditions, height needs, quantity and destination port. The factory returns a configuration sheet within the working week.

Confirm the sheet and production starts. Your schedule is quoted per order, matched to this floodlight platform.

IP65 Construction Floodlight Operation and Maintenance

The construction site floodlight operating cycle repeats on every site. Unfold the three support legs. Pull the pole up and lock the height. Plug into mains or start the gasoline generator. Tilt the lamp heads to the work.

The lightweight version’s 30W horn adds a voice channel for calls and alarms across the yard. Daily upkeep follows common sense: change the generator oil and clean the air filter per the engine manual, and wipe the IP65 lamp housing after rain stops. Rinse the lens with clean water each week to keep the light pool bright. A ten-minute monthly check on the three head brackets and the pole clamps keeps this construction site floodlight ready for the next night shift.

Maintenance fills the gaps between shifts. A ten-minute weekly check, lens wiped, legs locked, fuel level noted, lamp toggles cycled, keeps the IP65 construction floodlight running across a full season. Engines on the SLW6110 floodlight version want oil and air-filter changes on the engine manual clock. Short checks beat long breakdowns, especially when the next night shift starts at dusk and the supplier workshop is a day away from the site.

Check the pole locking clamps for firmness each month. Treat the locks the way the service manual expects, season after season.

Handling on site is simple. Never raise the mast while the unit is rolling. Park on level ground, open the legs first, then extend. Two minutes of setup discipline prevents a toppled pole at two in the morning.

Construction Site Floodlight or Light Tower: When to Pick Which

Small sites and big yards need different machines. The comparison below shows why this construction site floodlight and a diesel light tower are cousins, not twins.

The mobile floodlight for construction site duty covers 500–1000 m². One person deploys it in minutes, no trailer attached. The whole machine weighs 70–180 kg.

Low cost of ownership fits small pickets that rotate often. This is the tool for sites where a full tower would sit idle.

A towable diesel light tower covers 2000–5000 m² on a 7–9 m mast, running ten hours on diesel. It needs towing equipment and anchoring. Wide night zones and long fixed shifts are its home. A small site that rotates crews weekly never reaches that duty cycle, which is where the portable construction floodlight stays the right call.

The rule of thumb: small area, frequent moves, no towing — pick the floodlight. Wide area, long shifts, towing available — pick the tower. Many sites run both: the tower anchors the yard while floodlights fill the corners.

If your worksite sits between two choices, walk the tree:
Coverage over 1500 m² → choose a light tower (see the A1 range / D1 hydraulic tower).
Under 1500 m² with one-person operation → this integrated construction site floodlight.
13+ hours of continuous light needed → the 1000W generator version (3×250W, 2–3KW engine, 13 L tank).
Light rotation at 70 kg → the 600W mains version (3×200W, 30W horn).
Socket on site → mains mode saves fuel; no socket → generator mode.
Decision rule: area × runtime × rotation frequency.

Need a configuration matched to your site? Tell us the lighting area, the power condition and the mast height you need for this construction site floodlight. We reply with a factory-direct configuration and pricing band.

Not sure which column fits your gate? The decision path below condenses years of small-site orders into four questions. Area first: under 1000 m2 stays with the portable construction floodlight. Runtime second: overnight watches favour the generator chassis. Rotation third: daily moves reward the 70 kg version. Answer three questions and the machine names itself; the fourth question only confirms the choice once more, before you send the inquiry.

Below, buyers ask the sixteen questions we hear most often about this construction site floodlight unit. Every answer carries the listed specifications so you can compare on facts.

Construction Site Floodlight Decision Tree: Portable Unit or Light Tower

Pick your machine in four steps. For most small worksites, the construction site floodlight is the right call. This portable construction floodlight deploys by one worker in minutes, and the mobile floodlight for construction site format rides along on its own wheels; only when the area, runtime or rotation demand outgrows it do you step up to a light tower.

Small repair, indoor or under canopy → Portable floodlight SFW6133

A compact 600W portable construction floodlight with three 200W heads suits tight spaces where a trailer cannot enter. The 70 kg mains unit deploys by one worker inside a renovation floor or under a canopy. This portable construction floodlight is the quiet choice where a trailer cannot pass, with IP65 heads holding through rain.

Guardrail and pavement jobs on the move → SLW6110 generator floodlight

Rotating road pickets need this mobile floodlight for construction site crews: the SLW6110 floodlight rolls from one shoulder lane to the next, its 13 L tank holding at least 13 hours per fill with three 250W heads.

Emergency without mains power → 1000W generator floodlight

When the grid is down, the 1000W floodlight with generator stands in as self-contained night power. The 2KW/3KW onboard engine lights the emergency zone with no cable run from a distant socket. The IP65 construction floodlight heads keep working through rain on the emergency perimeter.

Wide site beyond 500 m² → Upgrade to a light tower

Once the work zone passes about 1000 m², this portable construction floodlight hits its ceiling. Step up to a towable tower for 2000–5000 m² coverage; the 1000W floodlight with generator stays the ceiling for self-contained portable light, and the earlier chapter shows exactly where that split sits.

That ceiling is real, not theoretical. Beyond 1000 m2, three 250W heads stretch thin; shadows creep back into the edges and the crew starts carrying extra lights to compensate. A towable tower on a 7 to 9 m mast spreads diesel-powered light across 2000 to 5000 m2 in one setting. Know when the construction site floodlight has done its job, and the budget goes where the light is needed most.

Across four steps, one rule survives: match the machine to the site, not to a generic brochure. A yard that rotates three small teams a night never justifies a diesel tower; a yard that pours through one long shift never settles for a mains-only 600W. Send the four answers with your gate width and socket list, and the factory reply lands as a single configuration, not a wishlist of alternatives.

The rule stays simple: area × runtime × rotation. When in doubt, default to the portable construction floodlight rather than over-specing a tower; a mobile floodlight for construction site duty deploys faster than any towed unit. Walk back through construction site floodlight or light tower when your site sits between two choices, and send us the lighting area and power condition for a matched configuration of this mobile floodlight for construction site duty.

Construction Site Floodlight Frequently Asked Questions
Q1. How long does the 1000W floodlight with generator run?
Filled to the cap, this construction site floodlight generator version runs at least 13 hours on one 13 L tank. That covers a full night shift without a mid-shift refill. The portable construction floodlight generator version keeps the 1000W heads lit the whole watch.

Q2. Can the 600W portable construction floodlight work without a plug?
No. The lightweight construction site floodlight is the 220V mains model, 600W across three 200W heads. If your site has no socket, choose the generator version. Its onboard 2KW/3KW gasoline engine makes the unit self-sufficient.

Q3. Is the SLW6110 floodlight gasoline engine noisy on site?
It is a gasoline-driven engine, so plan it like any small site power unit. Place it away from residential boundaries and worker rest areas. Follow the engine manual for run position and shielding on site.

Q4. Can the IP65 construction floodlight lamps stay outside in rain?
Yes. The lamp housings of this construction site floodlight carry an IP65 rating, and both versions hold level-8 wind resistance. Rain, mist and site wash-down do not stop the work. Wipe the lens after heavy downpours to keep the pool bright.

Q5. What is the 30W talk horn on this portable construction floodlight for?
The lightweight version ships with a 30W talk horn built into the pole. The foreman calls instructions, warnings or shift signals across the yard without shouting. It adds a voice channel to the same integrated light.

Q6. Can one person carry the 70 kg portable construction floodlight?
We recommend two-person handling. At 70 kg and collapsed 390×645×1450 mm, this construction site floodlight is built for two workers or a small van load. One person deploys it standing; two people lift it between sites.

Q7. Does the 4.8 m mast on this IP65 construction floodlight hold in wind?
The raised frame is rated to level-8 wind. For a small-yard gust environment that is steady working headroom. The raised construction site floodlight holds through passing-truck gusts; in stronger gales, fold the pole back down.

Q8. What fuel does the 1000W floodlight with generator run on?
Regular unleaded automotive gasoline. The 13 L tank feeds the onboard 2KW/3KW engine. Fill from standard site fuel cans, store spares away from the lamp, and follow the generator manual for octane and service intervals.

Q9. What is the difference between the 600W and 1000W floodlight with generator?
The 600W construction site floodlight runs on 220V mains with three 200W heads and weighs 70 kg, with no fuel to carry. The 1000W generator model adds a 2KW/3KW gasoline engine, three 250W heads and a 13 L tank good for 13 hours, at 180 kg. Pick mains near a socket; pick the generator for off-grid night shifts.

Q10. Can the engine on this 1000W floodlight with generator power other tools?
The onboard generator offers 2KW or 3KW capacity. Your tool load decides whether there is spare outlet headroom. Confirm every connected tool’s wattage against the engine capacity before you plug in.

Q11. Does this portable construction floodlight collapse small enough to fit in a van?
The generator version collapses to 1650×510×780 mm. That slides into a small truck bed or panel van. The lightweight version, at 390×645×1450 mm, rides even behind van seats. Both move without a trailer, so no towing licence or hitch is needed on the road.

Q12. What happens if a lamp head on this IP65 construction floodlight fails at night?
The lamp array is serviced as a complete replaceable head. Spare parts are supplied against your exact model. Pull the failed head, fit the replacement, and the IP65 sealed build goes back to work. Keep one spare head on long-night contracts.

Q13. Which saves more fuel: a mobile floodlight for construction site or a diesel tower?
The floodlight draws 600–1000W against a tower’s four 1000W heads. Small zones save on the floodlight. Wide 2000–5000 m² coverage costs less per square metre on the tower. Match machine size to the area.

Q14. Will the gasoline engine on the SLW6110 floodlight start in cold weather?
Follow the engine manual’s cold-weather start procedure. Use the recommended starting sequence and pre-warm steps before a winter shift. Winter storage also asks that the carburettor run dry before long off-season lay-up.

Q15. Can we print our colour and logo on this portable construction floodlight housing?
Yes. Housing colour and LOGO coating are arranged as requested. Custom branding available on request, especially for fleet buyers. Send your artwork with the configuration sheet, and we reply within the working week.

Q16. Where is the construction site floodlight commonly used?
It is widely adopted in public infrastructure projects: small site night works, interior renovation, road and bridge pickets, depot night shifts. Typical zones run 500–1000 m² for a compact construction site floodlight. Tell us your project type for a matched quote.

Q17. How wide an area does the 600W 3x200W floodlight cover versus a 1000W unit?
The 600W construction site floodlight covers about 500 m² on its 4.8 m mast, enough for an 800 m² renovation floor with the light set near one corner. The 1000W generator unit reaches about 1000 m² with its three 250W heads raised to 4.5 m. Pick the 600W mains model for compact interiors; pick the 1000W generator for wider off-grid night zones.

Q18. When should I pick a portable construction floodlight over a light tower?
Pick the portable construction floodlight for sites under about 1000 m² with one-person setup, frequent rotation or no towing gear; this mobile floodlight for construction site duty moves on its own wheels between pickets. Upgrade to a light tower only beyond that area or for fixed long shifts.

Construction Site Floodlight: Get a Quote for Your Project

We work with relief organizations worldwide. The construction site floodlight ships from a genuine manufacturer line, with full customisation support matched to your site kit. Buyers in construction, relief and depot operations all order from the same standard specifications.

Every configuration sheet carries the listed specifications, including the 600W and 1000W platforms and the 13-hour generator runtime.

Send us your lighting area, whether mains power exists on site, your height preference, model lean, quantity and destination port. The reply comes back with a factory-direct quote.

Request a portable construction floodlight quote for your small worksite today.

Mobile floodlight for construction site gallery – the following six views show the lamp head close-up, the generator base and this compact unit at work across typical small sites. Each frame matches the product photos: orange housing, silver telescopic mast, three lamp heads on the top bracket. Compare this construction site floodlight's 600W and 1000W platforms side by side before you ask for a configuration sheet.

Scroll through the frames and the same three objects repeat: orange steel chassis, silver telescopic pole, rectangular silver-grey lamp clusters. What changes is the environment, slab, depot, roadside, interior, which is exactly the point of the portable construction floodlight. The machine stays constant while night construction site lighting follows the crew. Every frame below is one real site, one real shift, no studio stand-ins, no color filters, no retouching.

Lamp head close-up: three 200W lamps sit behind toughened glass in an aluminium housing with cooling ribs and an adjustable tilt bracket. This portable construction floodlight's IP65 sealed joint keeps rain out of the reflector cavity, and the bracket locks the beam at any rake between the scaffold and the work face. Each head swivels on the shared top bracket, so all three light pools land on the same zone.

Behind the glass, the electrical path stays simple. Three lamp toggle switches sit on the brushed panel, each feeding one 200W or 250W head, with a green start light and an emergency stop within thumb reach. No programming, no app, no login. An electrician traces a fault in minutes, and a spare switch swaps on site. That simplicity is what keeps the construction site floodlight on duty season after season.

Generator base: the 2KW/3KW gasoline engine sits in the orange steel base beside the control panel, recoil starter and 13 L fuel tank, all built as one roll-on unit. This portable construction floodlight's frame carries the wheels and the support legs, so the generator, mast and lamp heads live on one chassis. One tank delivers at least 13 hours of night light without a refill stop.

Small night work area: this construction site floodlight on its 4.8 m mast lights two workers operating tools on a compact slab. The three heads spread an even pool across the zone, so no one works in their own shadow. One deploy covers a 500–1000 m² infill site without a trailer on the gate.

Warehouse loading dock: this mobile floodlight for construction site stands on the asphalt edge and lights the night loading platform while workers move pallets between dock and truck. The IP65 heads hold up against dock-side wash-down, and level-8 wind rating keeps the raised pole steady beside rolling trucks. One 1000W generator version watches the whole dock overnight on a single tank.

Roadside work: this portable construction floodlight rides along in a small truck bed and lights the shoulder lane, traffic cones marking the work area while workers in hi-vis vests repair the curb. Traffic keeps flowing on one side and the crew works on the other. The 70 kg lightweight unit deploys without a towing vehicle, so the picket sets up in minutes.

Equipment repair: the compact construction site floodlight lights maintenance on large equipment, two workers with tools.

As a mobile construction floodlight, the SFW6133 can be forklifted onto a skid and relocated in minutes, making it far more flexible than fixed site lighting.