Portable Rescue Thrower | Folding Stock Pneumatic Line Thrower for Flood and Swift Water

The portable folding-stock rescue thrower is a lightweight, foot-carried pneumatic line thrower designed for rapid response teams that move fast and travel light. Operating at 6.5-7 MPa with a weight under 3.2 kg, this portable rescue thrower fires a floating projectile 150-185 metres over land and 100-125 metres across water using a 3 mm high-tensile rope.

The folding stock reduces carrying length by 40%, making it the ideal remote rescue buoy for mountain rescue, urban flood response, and wilderness water rescue where every kilogram counts and every second matters.

A portable rescue thrower fires a line across the gap in seconds, and the rescuer stays on safe ground the whole time. Most pneumatic — powered by compressed air — throwers are bulky and bolt onto a base. This page covers the class that folds up, is light to carry, and goes where the truck cannot.

When floodwater swallows a city street and a rescue crew has to move fast, a shoulder-fired unit feels too heavy on a long approach and a base-mounted rig takes too long to set up while a victim drifts by. This portable rescue thrower closes that gap.

We supply portable folding-stock rescue throwers to rapid-response teams, mountain rescue units, and urban flood response teams worldwide. Lightweight fleet packages include custom logo labels, private-label carry bags, and OEM stock-colour options. Ask for wholesale pricing, a product catalog, and a quote for your response team inventory.

Portable Thrower Introduction	Applications
Why a Folding-Stock Thrower?	Safety Guidelines
BM06 vs BM07 Variants	Maintenance and Care
Key Specifications	Troubleshooting
What's in the Box	Rescue Thrower FAQ
Three Projectile Heads	Wholesale and OEM

Product Introduction: What This Portable Pneumatic Rescue Thrower Is Built For

When floodwater swallows a city street and a rescue crew has to move fast, a shoulder-fired unit feels too heavy on a long approach and a base-mounted rig takes too long to set up while a victim drifts by. This portable rescue thrower closes that gap.

It is a folding-stock unit with a lightweight titanium alloy body, carried in a backpack or sealed case, reaching at least 185 meters on land and 125 meters over water. It fires three interchangeable heads — land line, water float, and anchor hook — from one receiver.

It is built for rapid-response squads, vehicle patrol crews, and mountain rescue teams that hike in, set up alone, and put a line across the gap before a boat can launch. The rest of this page walks through how BM06 and BM07 differ and which numbers matter on the bank.

The receiver is a light titanium alloy die casting, sealed at every seam so chamber pressure does not weep out. The folding stock swings flat against the barrel for carry and locks open for firing.

This receiver runs on a minimum working pressure of 6.5 MPa, which is enough to send a line across an urban flood gap without dragging a heavy bottle on your back.

• A land projectile — the payload that carries the rope — shoots a thin working line. A water projectile ends its flight as an auto-inflating buoyant float. An anchor-hook projectile catches on structures.
• The color scheme is high-visibility on purpose: red-black receiver, bright red heads, orange buoyancy — the ability to float — parts, so you can find your gear in seconds on a muddy bank.

The design assumption is that one operator does the whole job, from loading to reeling the line back. Because the power source is stored in a small cylinder rather than a heavy base unit, the whole kit rides on one person's shoulder.

• Load the head, lay the line, aim, fire, and reel back. No second crew member, no tripod, no spirit level.
• When the call comes in at night on a flooded levee, you grab the pack and run. That is why mountain rescue units and swift-water teams keep one as a primary tool.

It is not a 300-meter weapon. If your gaps run wider than 200 m, step up to the base-mounted long-range class. But for the 50 to 185 m gaps that make up most urban flood and river crossing calls, this is the lightest tool that still does the real job.

Why a Folding-Stock Portable Pneumatic Rescue Thrower?

Large shoulder-fired throwers are powerful, but they are also bulky and recoil-heavy. The folding-stock portable class trades a little raw pressure for a lot of portability. At a minimum working pressure of 6.5 MPa — a unit of pressure — the whole receiver fits a backpack. The system is tuned for compact carry rather than maximum range.

• The folding shock stock absorbs recoil so your shoulder does not bruise after a dozen practice shots, and it folds flat so the gun does not snag on brush or a railing.
• At 185 m land and 125 m water, this compact gun out-reaches many bulkier shoulder units, thanks to barrel tuning and a lighter projectile rather than brute pressure.

Trajectory deviation is held within 1 degree, which is tight enough for field rescue line placement. The pneumatic valve opens fast and consistently shot to shot, so the point of impact does not wander the way it does on a manually pumped rig.

• At 150 m, 1 degree is about a 2.6 meter spread — tight enough to put a line on a balcony, a boat deck, or a far-bank handhold, though you still aim with wind and current in mind.
• We are not selling laser precision. We sell consistent, repeatable shots that land where a trained operator points them.

Folding Stock Operation: How to Fold and Unfold in the Field

The folding stock is the reason this portable rescue thrower goes on a pack instead of a sled. The steps take seconds once they are muscle memory, and they are the same for every shift because the pneumatic receiver never changes between calls.

1. To unfold: point the muzzle in a safe direction, press the stock release catch, swing the stock back until it clicks open.
2. Tug the stock rearward to confirm the lock engages. If it does not click, the gun is not ready to fire.
3. To fold: depressurize first, press the release catch, swing the stock forward until it lies flat against the barrel, and confirm it seats in the folded clip.
4. Never fold or unfold a pressurized rescue thrower with a loaded head.

Single Operator vs Two-Person Team Setup

The receiver is designed for one person, but a second pair of hands changes how the job feels. Because the system is self-contained, a partner is optional rather than required.

• Single operator: load the head, lay the line out straight, aim, fire, and reel back. This is the intended mode.
• Two-person team: one person shoots, the other manages the rope on the far end. A second person buys faster rope handling on the haul, not a steadier aim.

Portable Pneumatic Rescue Thrower Variants: BM06 Case Kit vs BM07 Gauge Kit, One Receiver

Both variants share the titanium receiver, the folding stock, the minimum 6.5 MPa working pressure, and the full range of ropes and projectiles. They differ in how the power source and the gauge are carried. If your gaps run wider than 200 m, see our long-range rescue thrower.

BM06 Case Kit vs BM07 Gauge Kit: Full Comparison

The comparison below places the two variants side by side on the same titanium receiver. Start at the power-connection row — that is the real buying difference, because it determines where you read pressure and how you carry the bottle.

The range, pressure, and rope rows are identical, so you can skim those unless your tender demands a specific configuration on paper.

Parameter	BM06 Case Kit	BM07 Gauge Kit
Receiver and stock	Titanium alloy body, folding shock stock, red-black	Titanium alloy body, folding shock stock, red-black
Working pressure	Minimum 6.5 MPa	Minimum 6.5 MPa
Land range	At least 185 m	At least 185 m
Water range	At least 125 m	At least 125 m
Anchor-hook range	50 m	50 m
Power connection	Integrated sealed body, inflation kit in case	High-pressure pneumatic hose runs to the firing point
Pressure gauge	Checked at the filling point	Silver inline gauge at the gun, read live
Buoyancy float	Orange float stored in the case	Orange buoyancy float fitted on the water head
Storage	Sealed black metal case, divided slots	Sealed case, layered slots for hose and gauge
Best for	Stationary teams, vehicle kits, warehouse reserve	Boat crews, patrol officers, fast single-person deploy

Read the difference this way. The BM06 case kit is the choice when your rescue thrower lives on a vehicle, in a reserve warehouse, or at a fixed station where the cylinder is filled at base and the whole sealed case drives to the scene.

• Pick BM06 if your team shares one portable rescue thrower across multiple trucks, needs every accessory locked in divided slots, and checks pressure at the filling point before departure.
• Pick BM07 if your operator carries the cylinder on their back, works from a boat deck or a hike-in riverbank, and needs to read live chamber pressure at the firing point. The inline gauge and pneumatic hose justify the extra parts on fast, single-person water rescue deployments.
• Both variants share the same pneumatic receiver, the same working pressure, and the same 185 m land / 125 m water range. The only real differences are the hose, the gauge, and how the float is carried.

BM06 or BM07: Quick Selection Decision for Your Pneumatic Kit

When the table is not enough, run through these four questions. Your answers point to one pneumatic kit, and they are designed to be answered in under a minute on the truck before you drive to the call.

1. Does your operator hike in with the cylinder on their back? If yes, pick BM07. The inline gauge removes the need for a partner at the filling point.
2. Does your team share one thrower across several vehicles? If yes, pick BM06. The sealed case is filled at base and drives to the scene.
3. Do you work from a pitching boat deck? If yes, pick BM07. Reading pressure live on deck beats guessing after a long patrol.
4. Is the thrower a fixed station or warehouse reserve item? If yes, pick BM06. It is the simpler, lighter-load buy.

Key Specifications: Portable Pneumatic Rescue Thrower Numbers That Matter

A spec sheet looks like a stack of figures. This section walks through what each row means in the field, so you can judge whether this portable rescue thrower fits your gaps before you buy. We break the numbers into three tables: performance, build, and environment.

Pneumatic Performance and Pressure Ratings

This performance table lists the numbers that decide whether the thrower reaches your gap. Read the land and water range rows first, then check the working pressure against the cylinder you already stock. The deviation row tells you how tight your aim must be at 150 m, and it reflects how consistently the pneumatic valve delivers shot to shot.

Parameter	Value
Product class	Portable folding-stock pneumatic rescue line thrower
Working pressure	Minimum 6.5 MPa
Land effective range	At least 185 m
Water effective range	At least 125 m
Anchor-hook range	50 m
Trajectory deviation	Within 1 degree

Build Materials, Ropes and Wear Parts

This build table covers the materials and the ropes that wear out on a thrower. Focus on the land and water rope strength rows — they tell you whether each line holds a working load or a floating victim. The consumables row matters for distributors, because one spare-parts shelf fits both BM06 and BM07.

Parameter	Value
Body material	Light titanium alloy, die-cast, air-tight seams
Stock	Folding shock-absorbing, locks open for firing
Land rope strength	At least 2500 N, braided synthetic
Water rope strength	At least 7000 N, floating braided
Projectile shell	High-strength composite, one-piece molded
Consumables	Projectiles, rope, seals; interchangeable across series

Operating Environment and Carry Conditions

This environment table shows where the thrower safely operates and how it is carried to the call. The operation row confirms single-person setup, and the environment row tells you whether cold, rain, or salt shore is within spec. The order row points you to contract terms rather than fixed numbers.

Parameter	Value
Color scheme	Red-black receiver, red heads, orange buoyancy parts
Storage	Sealed hard metal case, stamped divided slots
Operation	Single person assembles, fires, and repacks
Environment	Low temperature, rain, snow, fresh and salt shore
MOQ and lead time	Subject to contract

A note on the rope numbers: land rope and water rope are not interchangeable, even on the same rescue thrower.

• The land rope is thin and low-drag, which is why land range beats water range on the same gun. The water rope is thicker and floats, so the victim can see and grab it on the surface.
• Never fire the thin land rope into open water expecting a floating line. Match the head and the rope to the surface.

What's in the Box: Portable Pneumatic Rescue Thrower Package Contents

Before you order, you want to know exactly what shows up on your dock for this portable rescue thrower. Below is the standard kit list for both BM06 and BM07, the optional extras, and the wear parts to budget for. Exact head count per SKU is settled on the order sheet.

BM06 Case Kit: Standard Configuration and Parts

This is the full parts list for the BM06 sealed-case version of the thrower. The quantities column shows what comes in the case; check the notes column for head count has a clear role before you sign the order. Any part not listed here is an optional extra you add separately.

BM07 Gauge Kit: Additional Pneumatic Fittings on Top

This short table isolates the three parts that make BM07 the gauge-equipped pneumatic version. Read the rows top to bottom: the hose carries compressed air to the gun, the silver gauge shows chamber pressure live, and the orange float rides on the water head instead of rattling loose in the case.

Item	Qty	What it does
All BM06 contents, plus:
High-pressure pneumatic inflation hose	1	Runs from the cylinder to the firing point
Inline pressure gauge (silver)	1	Reads live chamber pressure at the muzzle (BM07 only)
Orange buoyancy float	1	Fitted on the water head instead of stored loose

Optional Accessories and Spares to Order Separately

• Spare carbon or steel cylinders: a backup bottle means you keep shooting when the first runs low on your rescue thrower.
• Extra land and water rope: ropes wear out fastest on flood days, and a frayed line will not hold a lifebuoy or a victim against current.
• Spare seal kits: O-rings and breech seals are cheap to stock and mission-critical if a pneumatic fitting leaks.
• Backpack carry sling: for teams that hike the case in instead of driving to the bank.
• Spare auto-inflating lifebuoy head: the water projectile doubles as a throwable lifebuoy once it inflates on the surface.

Wear Parts and Suggested Pneumatic System Replacement Cycle

This wear-parts table tells you which pneumatic consumables to budget for over a five-year program. Read the "why it wears" column first — it predicts which part fails in your climate. Then match it to the suggested cycle so spares are on the shelf before a failure on call.

Part	Why it wears	Suggested cycle
Pneumatic seals and O-rings	Pressure side, dries out over time	Inspect after each training cycle; replace per inspection
Projectile shells	Composite cracks on hard impacts	Replace immediately if cracked; treat as scheduled consumable
Working ropes	Abrasion on concrete, rock, and debris	Inspect after each water call; retire on visible fraying
Buoyancy float / lifebuoy bladder	UV exposure and repeated inflation	Check buoyancy each season; replace if it no longer stays afloat

Three Projectile Heads for the Portable Pneumatic Rescue Thrower: One Receiver

One gun, three jobs. The pneumatic receiver stays on your shoulder; you swap the head at the muzzle. This is why a portable rescue thrower earns its place on a rig instead of a single-purpose throw bag.

Land Projectile: Thin Rope Across Dry Ground

The land head is a solid streamlined red composite shell. It carries a thin braided synthetic line rated at least 2500 N.

• Fire it across a flooded street, between two boats, up to a balcony, or across a gully on dry ground. The thin line has low drag, so it reaches the full 185 m on pressure alone.
• Once the far end lands, pull a heavier working line through behind it. The land line does not float, so it is the wrong choice for open water.

Water Projectile: Auto-Inflating Buoyant Lifebuoy Float

The water head ends its flight as an orange buoyant float. On impact with the surface it inflates and stays on the water, turning this pneumatic gun into an effective water rescue thrower that delivers a ready lifebuoy to the victim.

• It trails a thick floating rope rated at least 7000 N. The victim grabs the orange lifebuoy float, the bank team hauls the line, and the rope never sinks.
• Water range is shorter at 125 m because the floating head and thick rope drag more than the thin land line. That is normal, not a defect.

Anchor-Hook Projectile: Claw for Structures

The anchor-hook head carries a shaped claw instead of a simple weight. It catches on a railing, window edge, rock crack, or bridge lip.

• Hook range is 50 m, shorter than line range because the claw and the thicker transfer rope drag more. Use it for cliff work, bridge evacuation, and high-rise line placement.
• Train on a practice edge first, and never load the hook until you have visually confirmed it is seated on a solid structure.

Applications: Where This Portable Pneumatic Rescue Thrower Earns Its Place

The folding-stock pneumatic rope launcher is built for operators who move on foot or from small craft. This portable rescue thrower doubles as a water rescue thrower when paired with the inflating lifebuoy float head. For wider gaps over 200 m, see the base-mounted long-range rescue thrower. It serves coast guard rescue auxiliaries, fire department water rescue rapid response teams, and emergency water rescue volunteers needing swift water rescue capability and flood rescue equipment in a lightweight package.

Rapid-Response Pneumatic Teams on Flooded Streets

When a city floods, victims end up on roofs and medians 100 m apart across moving water. For official flood safety guidance, the NOAA flood safety page explains why moving water is more dangerous than it looks.

• A rapid-response officer can hike in with the folded gun on a pack, set up on a dry curb, and put an orange lifebuoy float across the current before a boat can launch.
• The 125 m water shot covers most urban river crossings. One officer starts the rescue while the rest of the team accesses the victim.

Single Patrol Officers and Border Rivers

A patrol officer on a river beat does not carry a crew. The portable rescue thrower rides in a side pouch or backpack.

• If someone goes overboard, the officer stops the vehicle, opens the case, and shoots a floating lifebuoy line in under a minute. The sealed case keeps dust, sand, and rain off the seals between calls.
• The titanium body does not rust in salt shore spray.

Mountain Rescue Across Ravines and Gullies

Mountain teams hike to the edge of a gully and need a line to a stranded hiker on the far slope.

• The 185 m land shot clears most ravines, and the 50 m anchor hook lets you set a temporary belay point on a rock lip. Because the pneumatic gun folds and is light to carry, it goes on the rescue pack instead of a sled.
• The folding stock matters here: on a narrow trail, a long unfolded gun catches on trees.

Boat Crews Quick-Deploying From RIBs

On a rigid inflatable boat pitching in a current, a heavy base unit is awkward. This compact rope thrower lives beside the rope bag as a quick rescue line launcher for overboard calls. Standard overboard response drills practiced by maritime teams worldwide cover the principles this tool supports.

• When a person goes overboard, the bow crew shoulders the gun and shoots the floating water lifebuoy line before the boat turns around.
• The BM07 variant with the inline gauge is the common pick here, because seeing the bottle pressure on the spot matters when you have been cruising for hours.

Related Water Rescue Equipment and Lifesaving Gear

The portable rescue thrower is one component of a complete water rescue equipment and lifesaving equipment toolkit. Our range includes swiftwater rescue gear, emergency rescue equipment, marine rescue equipment, and search and rescue equipment for first responder equipment buyers. As a wholesale rescue equipment supplier, we offer OEM and bulk pricing for water safety equipment, water rescue rope thrower kits, and CO2 powered rescue thrower systems for distributors and government agencies.

Safety Guidelines for Your Pneumatic Rescue Thrower

A rescue thrower is not a toy. It fires a weighted head at speed from stored compressed air. The rules below are the operating boundary every trained operator works inside. For general worksite rescue duties, OSHA emergency preparedness guidance sets the broader training expectations this equipment must fit.

High-Pressure Pneumatic Cylinder Safety

• Working pressure is a minimum of 6.5 MPa. Never overfill beyond the rated pressure shown on the cylinder that powers this rescue thrower.
• Do not leave the charged thrower in direct sun on a hot vehicle deck. Heat raises chamber pressure; the cylinder is not rated for sun-baked overheating.
• Never disassemble the cylinder valve, the fast-acting pneumatic valve, or any pressure fitting while charged. Always open the manual pressure release before breaking a connection.

Muzzle Direction and Bystander Clearance

• Never point the muzzle at a person, even when unloaded. Before firing, visually confirm the flight path is clear from muzzle to impact point.
• Keep bystanders at least 5 meters behind and to the sides of the shooter. Confirm the far side has no personnel in the target area.

Recoil Control and Weather Limits

• Seat the stock firmly against your shoulder. Do not fire standing on an unstable surface (wobbly boat deck, loose rock, wet mud) without a brace.
• Do not fire in thunder and lightning, in high wind that pushes the head past your correction, or in heavy rain that hides the target area.
• Store the thrower in the sealed case in a dry ventilated room, out of reach of children and untrained personnel. Only operators who have completed hands-on training may fire it in the field.

Pneumatic System Maintenance and Care for the Portable Rescue Thrower

A rescue thrower sits in a case for weeks and then has to work on the first shot. Routine pneumatic maintenance is what makes that reliable. The essentials are a post-call rinse, a monthly seal check, and sensible storage.

Post-Operation Rinse After Water or Salt Exposure

1. Depressurize the system with the manual release screw and wait until the gauge reads zero before touching any fitting.
2. Rinse the receiver, cylinder threads, pneumatic hose (BM07), and projectiles with fresh water. Open the breech and let everything air dry completely before repacking.
3. Check the breech seal for flattening or nicks and lubricate lightly per the manual. Wind the rope back on the reel in neat turns so the next shot does not tangle.

Monthly Inspection and Annual Pneumatic Valve Service

• Monthly: gauge needle rests at zero when depressurized (BM07 only); seals show no flat spots or cracks; the stock folds and locks with a positive click; rope has no fraying; case latches close firmly.
• Annual: have the pressure-side seals and fast-acting valve inspected by a qualified shop. The cylinder follows the pressure-vessel inspection schedule required in your region.
• Storage: depressurize, leave the breech open, store in the sealed case in a dry room, and air it out once a season. Rinse road salt off after winter calls.

Pneumatic Rescue Thrower Troubleshooting: Common Issues and Fixes

Most field problems on this portable thrower come down to air, rope, a seal, or a dirty breech. Run through the faults below before you call for service. If the pressure side still leaks after a seal change, stop and send the thrower in.

1. Range falls short (shot lands well inside the far bank)

• Likely causes: cylinder pressure low; rope tangled on the reel; angle too flat; moderate crosswind.
• Fix: check the gauge (BM07) or refill at the filling point (BM06); re-lay the line straight off the reel; raise the elevation slightly; aim upwind of the target.
• Prevent: always start a call with a full cylinder and a neatly wound reel, and check wind direction before the first shot.

2. Pneumatic Cylinder Will Not Take Air

• Likely causes: filling seal dirty; pneumatic hose not seated (BM07); fill valve blocked by grit.
• Fix: clean the seal face; reseat the hose fitting with an audible click; inspect the fill valve per the manual before forcing pneumatic air in.
• Prevent: keep the inflation kit in its sealed slot and wipe the fitting before every connection.

3. Trigger will not pull

• Likely causes: dirt or grit in the trigger mechanism; a foreign object in the breech.
• Fix: depressurize first, then brush the breech and trigger group and apply a light lubricant per the manual. Never force the trigger.
• Prevent: rinse after every muddy or salt call and keep the breech closed when not in use.

4. Rope tangles mid-shot

• Likely causes: line reeled in messy turns; a kink left over from the previous shot.
• Fix: wind the rope back in neat layers between shots; cut out and retire any kinked or knotted section rather than trying to pull it free.
• Prevent: make rewinding a deliberate step after every shot, not an afterthought.

5. Pneumatic Seal Hissing at the Breech

• Likely causes: breech seal flattened or nicked; head not fully seated in the latch.
• Fix: depressurize the system, replace the breech seal, then confirm the head clicks firmly into the latch before repressurizing.
• Prevent: inspect the seal after each training cycle and keep spares in the repair kit.

6. Gauge needle will not settle (BM07 only — BM06 has no gauge)

• Likely causes: gauge calibration drifted; small pneumatic air pocket in the line.
• Fix: bleed and re-pressurize once. If the needle still wanders or will not return to zero, send the gauge in for calibration. BM06 operators skip this check and verify pressure at the filling point instead.
• Prevent: treat the silver gauge as a delicate instrument — avoid banging it on the case or railing.

7. Head drops off the muzzle

• Likely causes: muzzle latch worn; projectile nose out of spec.
• Fix: inspect the muzzle catch for wear; fit a fresh projectile; check the latch spring per the manual if the problem repeats.
• Prevent: treat composite heads as consumables and retire any that show cracks or dents.

If you run through all seven faults and the thrower still will not hold pressure or will not fire, do not keep stripping it. Send it to a qualified service center. Pressure gear that you field-repair past the seal swap is how someone gets hurt.

Pneumatic Rescue Thrower FAQ: Frequently Asked Questions

What is actual throw distance on land and water?

Land effective range is at least 185 m. Water effective range is at least 125 m. The anchor-hook head reaches 50 m. Water range is shorter because the inflatable lifebuoy nose and thick flotation rope pull more than the thin land line. Always plan water shots around the water number.

Do BM06 and BM07 use the same ammunition?

Yes. The pneumatic receiver, the red composite projectiles, the ropes, and the seals are shared across both variants. Buy spares once and they fit either gun. The difference is the power connection and the gauge (BM07 only), not the ballistic side.

What is the difference between the 2500 N land rope and the 7000 N water rope?

The land rope is thin, low-drag, and rated at least 2500 N for pulling a working line across dry ground. The water rope is thicker, floats, and is rated at least 7000 N so it holds a victim and the attached lifebuoy against current.

Can one person really operate it alone?

Yes. The design assumption is single-operator: assemble, load, check pressure, aim, fire, reel back. A rope handler helps on the haul, but the shot itself does not need a second crew member. The BM07 inline gauge lets the shooter read pressure without a partner at the cylinder.

Is it , and does it use open flame?

It runs entirely on compressed air. Stored pressure pushes the round through a quick-release port, which makes this rescue thrower safe to use where ignition sources are restricted. No gunpowder, no rocket motor, no flame at the muzzle.

What comes in the standard kit?

See the What's in the Box section above for the full parts list. In short: pneumatic receiver, sealed case, land and water projectiles, anchor-hook projectile, rope reel, inflation kit, and repair consumables. BM07 adds the pneumatic hose, silver gauge, and fitted float. The precise quantity of head count per kit is finalized on your purchase order.

Do you supply certifications for tenders?

Bid documentation can be assembled on request. Confirm the exact certification package per SKU before procurement, because documentation can differ between BM06 and BM07 pneumatic configurations.

What is the minimum order and lead time?

Final pricing, order minimum, and delivery dates are set in the contract. Send us your range requirement and your typical scenario, and we will reply with matched options and a realistic price band.

What other names is a portable rescue thrower known by?

This lightweight unit is also called a line throwing device, line throwing apparatus, or rescue line gun in backpack configurations. Hikers and mountain rescue teams may refer to it as a pneumatic line launcher or remote rescue thrower. Its compact size makes it popular as a rescue buoy launcher for wilderness response.

Wholesale Portable Pneumatic Rescue Throwers: OEM and Bulk Supply

We are a water rescue equipment supplier and wholesaler based in China, not the factory itself. We supply fire departments, water rescue teams, border patrol units, mountain rescue services, and distributors who want one partner for portable rescue throwers and related gear.

• The folding-stock pneumatic class is a steady seller for flood control programs, school and city emergency kits, and second-unit buys for boat crews.
• Because projectiles, seals, and ropes are shared across BM06 and BM07 pneumatic variants, distributors stock one spare-parts shelf instead of two.

We support wholesale volume pricing, private label on the case, and OEM configuration for program orders. ODM level changes such as a different rope length are discussed project by project. Contact us for MOQ and lead time; exact numbers are set on the contract. Standard payment is T/T with deposit and balance before shipment, with L/C discussed for larger programs.

We provide sample units for evaluation, and the sample fee is often credited against a later bulk order. Tell us whether you need the sealed-case BM06 or the gauge-equipped BM07, how many heads per kit, and which certification package your tender requires. We will spec the pneumatic package and give you an honest delivery window.

For distributors, we keep head kits, seals, and ropes in stock so a reorder ships within days rather than weeks. For tender programs, we pull together a one-package quote: thrower, spares, training ropes, and the certification documents your procurement office asks for, so you do not chase three suppliers to fill one bid.

We do not push the larger variant on every quote — if your measured gaps stay under 120 m, we will say so. Send us your typical scenario and your target price band, and we will reply with the kit that actually fits, not the one with the highest margin.

About Us: Your Portable Pneumatic Rescue Thrower Supplier

We are a water rescue equipment supplier and wholesaler based in China, focused on tools that hold up under repeated field use. Our range spans rescue throwers, floating rescue ropes, throw bags, and auto-inflating rescue buoys that work with the float round.

We work with distributors, fire departments, maritime teams, emergency bureaus, and training centers. Our role is simple: we help you source a tested rescue thrower program in one order, keep the spare-parts shelf simple, and back it with a manual and a fast technical reply.

Every unit we ship goes through incoming material checks, in-process inspection, a 100 percent outgoing pressure test, and a final packing check against your order list.

What problems does this solve for you? Instead of chasing three suppliers for a thrower, ropes, and seals, you deal with one partner who already knows the parts fit together. Instead of guessing whether a unit survived shipping, you read the pressure test report before you sign.

Instead of waiting weeks for a spare seal on a flooded weekend, you order from a stocked shelf. We work with selected factories that build to agreed specs, and we check every incoming batch ourselves before it leaves our hands.

We do not sell based on marketing numbers. If your gaps are under 80 m, we will tell you a lighter class does the job. If they run to 185 m on foot, this folding-stock portable rescue thrower is the right starting point.

Measure your widest gap, tell us your scenario, and we will send a shortlist rather than a sales pitch. Bid documentation can be assembled on request.